columcille wrote I have a sky router that i get the wifi from and trying to extend it to stables. The EAP110-Outdoor does not support wireless extender modes. It's an Access Point always working in...

GRX wrote The issue is that it gets an IP address outside the router's range. My router's IP address is 192.168.1.1, with a pool from 192.168.1.2 to 192.168.1.254. Once I plug in the new AP, it...

Argon522 wrote I am unable to run a cable between the two needed points and would like to avoid having to "double up" on equipment by needing a separate dedicated bridge device. My current setup...

@ymd, the problem seems to be related with reboots. If I reboot all EAPs at the same time, they won't select different channels: If I reboot the EAPs one after another, they select different...

@KimInWis, if the device worked for 1.5 years but suddenly starts malfunctioning, it sounds to me like a damage from lightning storms. Did you ground the outdoor device correctly to mitigate against...

Nuukem wrote Should I set each AP account back to the default admin/admin before attempting to "adopt"? To change from standalone mode to managed mode an EAP must be set to factory defaults. Just set...