@Hafeez20101981 How do you manage the EAP? If you manage the EAP via the Omada Controller, then you should install the Omada Controller on the PC and keep it running. Then you can enable Cloud Access...

@JessieG , For the step 4 Configure uplink for isolated AP. Let me explain it to you. (1) Click the Isolated AP, then click Mesh; (2) In mesh page, an "uplink AP" and basic information will be...

@Devinfotech2016 , We found that in your network topology, you use the AC2300 as the DHCP Server. Actually, AC2300 can only support about 40 client devices. That's why your system will not work when...

@JessieG , We recommend you to configure the mesh network again. Please make sure that you enable mesh on the OC200 first. Then you can do it as the following steps. 1. Connect all EAP devices and...

@trauts14 , From your description, it should be EAP225-Outdoor. When you put it in the secondary WLAN, it doesn't broadcast the SSID. Here are some suggestions for you to have a try. 1. Please check...

@hughLink , We have changed the "SSID Isolation" to "Guest Network" in Controller 3.1.4. With the “Guest Network” enabled, the devices connected in the same SSID of the same AP cannot communicate...