@bincomIT Great point. A low profile USB stick (similar to wireless mouse USB dongle) plugged in and not really protruding out, is what I will be using henceforth and thus not dependent on customer...

And I don't have any switch or EAP or Gateway ACLs and I still have controller stuck at 90% even after two reboots.

In my case, one site with SG2210P switch, OC300, ER7206, 6xEAP225 went fine from 4.4.6 to 5.0.29 all thru remote cloud software upgrade. Then I proceeded to do the same for another site with exact...

In my case, a remote OC300 failed firmware upgrade via cloud last night and is stuck at 90% with exact same error. I have tried rebooting twice (remotely using a ethernet power controller) and...

@1207 I have a working gateway with latest firmware 1.0.1 and OC300 with 4.2.11 and 12 of EAP245 with 5.0.1, and I have two wireless SSID each with a different subnet (and a management subnet that I...

Unless you have multiple subnets and you do want to access these cameras from a different subnet / vlan, why will you not try my method that will still allow cameras to talk to your NVR in the same...