Model : Hardware Version : Firmware Version : ISP : Hi, I have a TP-Link EAP110 but I am struggling to work out how to set this up as a WiFi repeater. My router is upstairs and I am struggling with th

I have setup a mesh-linked network and working ok for remote device wireless connection. However unable to see our printer which is Ethernet connected directly to the router. Any suggestions?

This might sound like a daft question but which is the best TP-Link Router to use with 3 x EAP225 Access Points. I have a very long L shaped bungalow and the exiting Genexis HRG1000 router is approx 1

I installed Omada Controller v3.2.1 and adopted 2 EAP225 AP's. I configured a SSID and selected 'WPA-PSK' for 'Security Mode' then under 'Advanced Settings' chose 'Auto' for 'Version' as I have both W

I have a question about EAP 245 VLAN handling on the passthrough port. My config has has 3 SSID's on 3 separate VLAN's. The access point is connected to a TL-SG2210P smart POE switch. I've found that

I had an intel 8260 wifi card on a gigabyte PCIE card for my desktop. Recently i was having issues where 5 ghz was not visible or not working. I replaced the card with a 9260 and i stgill have the sam