Access Points
Welcome to the Wi-Fi Access Points forum — your dedicated space for all discussions concerning TP-Link's diverse range of wireless access points. Here, you can find and share information on topics like optimizing performance, extending network coverage, troubleshooting recommendations, and understanding advanced features such as PoE and mesh capabilities. Join our community to ask questions, share your expertise, and get the most out of your TP-Link Wi-Fi Access Points!
Access Points
The following thread describes my issue almost exactly. https://community.tp-link.com/us/home/forum/topic/663412 I have a pfsense router that is also acting as a DHCP server. That router is connected
Multi-SSID ModeWA-3001
By
Slackware1995
· Latest post 2025-07-20 08:12:32
by Slackware1995
0Helpful
1178Views
Firmware Version: 1.0.3 Build 20240718 rel.71405(5553) Hardware Version: TL-WA3001 v1.20 I set the WA3001 up for a small office in multi-SSID mode and seems to be working well. When local management i
Multi-SSID Mode
0Helpful
1577Views
>> This is for TL-WA3001 - There is still no option to select this device in the drop-down list << I have three TL-WA3001 and I would like to assign them a unique device name (vs. just IP address), bu
Multi-SSID ModeCustom Device Name
0Helpful
1522Views
Just purchased an AC1200 TL-WA1201 to extend wireless range of an existing AC1750 main router several rooms away. I can connect the TL-WA1201 to the AC1750 with a WIRED Ethernet cable. So what mode sh
Range Extender ModeMulti-SSID Mode
0Helpful
499Views
Sorry for putting the wrong model in the post, but I still don't see the TL-WA3001 as an option. I've tagged it instead. I've noticed an issue with my TL-WA3001 access point (using both the existing s
Multi-SSID ModeTL-WA3001
0Helpful
707Views
EDIT: I rebuilt everything from the ground up and it's working fine now. Not sure what was causing it so I won't be able to tell you if you ask. My WAP is connected to a pfSense router. pfSense is con
Multi-SSID Mode
2Helpful
1381Views
I'm trying to understand how client mode works on the TL-WA901N. If my existing wifi network uses 192.168.1.x with a gateway (and DHCP server) of 192.168.1.1, then how do I configure the LAN settings
Multi-SSID Modeclient mode
1Helpful
1136Views