Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.11.0.0043

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123...

Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.11.0.0043

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.11.0.0043
Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.11.0.0043
2020-04-19 13:03:09 - last edited 2022-05-24 03:44:31
Model: TL-WPA8630P KIT  
Hardware Version:
Firmware Version: QCA75XX-2.11.0.0043

Powerline firmware for TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) version QCA75XX-2.11.0.0043

 

This firmware is with 1200Mbit and 1300Mbit adapters compatible of every manufacturer with QCA7500 and QCA7550 chip regardless of hardware version.

Update via tpPLC_Utility for Windows or Mac with PIB file of previous firmware update.

 

TL-WPA8630(P):

QCA7500-2.11.0043_for_usual_hardware.nvm

https://mega.nz/file/pdVTmSyQ#iKH_4xY9GSZkxLl5HD5g_mxHt80AMREp0Oh4qBZFf7Q

 

QCA7500-2.11.0043_module_at_position_5_additional_so_with_7_modules_for_new_hardware.nvm Function of this module 5 unknown and not tested but was seen at devices with QCA7550 chip beginning August 2021). Works with TL-WPA8630 V1.

https://mega.nz/file/lAEBXCgS#dmHePU8qzffBicMYQd04hyb13xHrEIh1JdPZjaeTp5I

 

 

TL-PA8010(P), TL-PA8030(P), TL-PA8033(P): (hardware revisions with more memory could use as well the not stripped nvm file)

 

QCA7500-2.11.0043_modules_5-6_stripped_for_usual_hardware.nvm (description of modules 5 and 6 is written in message #113 of this thread)

https://mega.nz/file/UcUx1aYS#Dve_qReXile2jBg-OrBg5YGL5nQ4ppctxyH2atUTAwI

 

QCA7500-2.11.0043_module_at_position_5_additional_so_with_5_modules_for_new_hardware.nvm without the modules which are named 5 and 6 but here would be 6 and 7 for newer hardware with e.g. more memory. Function of this module 5 unknown and not tested.
https://mega.nz/file/YJkiCCrK#uykjC0_MYmqlA-rHaMuTc6iWEEPvTGsrKA109F-MuJk

 

 

Changes to version 2.10.0.0032 are:

Stability increase

IPTV streaming to several adapters improved

 

Previous:

QCA75XX-2.10.0.0032.nvm

https://mega.nz/file/5cEl2KLA#0rEqjZPwJJIvxkSlubBLGOHkgtqJ81Tlx4LxcXl41qE

 

QCA75XX-2.10.0.0032_modules_5-6_stripped.nvm

https://mega.nz/file/REcliYJC#iicAohSemkzZNzDljGRDVStwdX-fkzhaCBYO0ytQGnM

 

TL-WPA8630(P):

QCA75XX-2.8.0.0030.nvm

https://mega.nz/file/NENXSSpb#uNPKc30NMc9E9hM8YiC491exuoo4wFMoc-2_Byuv5fU

 

TL-PA8010(P), TL-PA8030(P), TL-PA8033(P):

QCA75XX-2.8.0.0030_modules_5-6_stripped.nvm

https://mega.nz/file/MJMngIgD#ZCDdBo5F1T_bIeGQM2tv8qpgz62lno-2oPAXY9K9o6g

 

Changes to version 2.8.0.0030 are:

Stability increase

Powerline network management improvement

 

Changes to version 2.7.0.0041 are:

Transfer speed increase

Boot time reduction

Stability increase

 

This is an official public available firmware.

  7      
  7      
#1
Options
2 Accepted Solutions
Re:Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.10.0.0032-Solution
2021-02-17 19:03:17 - last edited 2023-02-12 21:58:23

@PowerlineFW 

 

I own three WPA8630 v1 devices. I also purchased one 8630P v2 and V2.1 to help an OpenWRT developer add support for them into OpenWRT. I have since sold the v2 and v2.1 because they have less flash available for OpenWRT and also the 2.4GHZ radio only goes to 20dbm instead of 22dbm of the 8630 V1.

 

Anyway I build my own firmware, I don't use the ones provided by the automated build system of the OpenWRT project. As such, I compile in all the packages I want and every time I want to upgrade the version I just pull the latest master repository and compile it.

 

Building your own image is very easy, if you have time you have to try it :)

Recommended Solution
  1  
  1  
#80
Options
Re:Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.12.0.0061-Solution
2022-05-23 19:16:57 - last edited 2022-05-24 03:44:31

Firmware TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.12.0.0061

 

newer powerline firmware https://community.tp-link.com/us/home/forum/topic/553172?page=1

 

I couldn`t update the old thread with new links to mega dueto it is now detected as an illegal link

 

Recommended Solution
  5  
  5  
#120
Options
116 Reply
Re:Firmware for TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-05-08 13:59:30

@PowerlineFW 

 

Where can I download this latest FW version?  When I go to TP Link supportpage for my product PA8030P the only firmware version shown is TL-PA8030P KIT(US)_V2_170704.

 

Thanks

  0  
  0  
#2
Options
Re:Firmware for TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-05-12 19:32:11

@JohnCW 

 

Just combine the pib file in the zip firmware of the tp-link website with the nvm from the link above in tp-link tpPLC tool for flashing. In your case when in the US you take the zip firmware file with US in the name and for EU with EU in the name.

  0  
  0  
#3
Options
Re:Firmware for TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-05-15 16:24:33 - last edited 2020-05-15 16:25:37

@PowerlineFW You say "This is an official public available firmware." but you are linking to it from mega.nz. Can you point to where it is officially available?

 

I very much doubt TP-Link would make availble tested firmware for public consumption through mega.nz, and I don't want to brick or compromise my network equipment.

  0  
  0  
#4
Options
Re:Firmware for TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-05-15 17:05:20 - last edited 2020-05-15 17:11:07

Decide as you wish. I do not make advertising of other power line selling manufacturers. It is the general nvm file without the special adapted pib file of this manufacturer. Maybe you find out which manufacturer offers this firmware version. Many others did flash sucessful, its up to everyone.

  0  
  0  
#5
Options
Re:Firmware for TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-05-15 19:09:54

@PowerlineFW could you give a bit more info, since you seem to know a bit about Powerline networking from your previous posts - but installing some firmware from an anonymous online locker on the advise of a stranger in a public internet forum still feels risky.

  0  
  0  
#6
Options
Re:Firmware for TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-06-02 13:09:54

This is a very interesting post for all the ppl stuck with the 2.2.3 version (and related issues).

 

Anyway, making public the name of the other vendor could allow everyone to self evaluate if is worth to take the risk or not.

I don't think it's a matter of supporting or not another company, it's just a matter of "transparency".

 

Thanks!

 Max

 

ps.

 It's very sad that there are no TP-Link feedback or interest in supporting people trying to help other ppl, nor even giving just a comment on the thread.

  0  
  0  
#7
Options
Re:Firmware for TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-06-02 13:57:45 - last edited 2020-06-02 14:00:16

@PowerlineFW thank you for doing what is supposed to be TP-LINK's job.

 

To everyone that is looking for a way to improve their Powerline device performance, here are some facts that you may want to know:

 

FACTS:

 - Qualcomm is the manufacturer of some of the PLC ( powerline ) chipsets that TP-LINK uses on it's devices

 - Qualcomm supplies manufacturers with firmware updates so that they can provide updates to their customers devices

 - Firmware supplied by Qualcomm is the same for all manufacturers ( TPLINK, DEVOLO, LINKSYS, etc ).

 - There is no difference between a device manufactured by TPLINK or DEVOLO from a chipset or firmware point of view. The changes are essencialy cosmetic and in price.

 - Qualcomm QCA75XX chipsets are used in many TPLINK and other manufacturers devices.

 - Qualcomm has been suppling manufacturers with firmware updates on a regular basis for many years

 - Latest firmware version released to manufacturers by Qualcomm for the QCA75XX is now on version 2.8 ( released 2020 )

 - DEVOLO is one of the manufacturers that has already provided this update to their customers.

 - TPLINK is still using several years old firmware on their QCA75XX devices ( I believe 2.1 or 2.2 firmware version )

 

 Why is TPLINK not providing their customers with firmware updates that bring performance and stability improvements, along with other improvements to their customers?

 - Many possible reasons, my personal take is that their couldn't care less. They are not proud of what they manufacture and they don't care about their customers.

 

I own two TL-PA8010P V1.0 ( PLC only ) and two TL-PA8630 V1.0 ( PLC + WIFI ) . I have upgraded all of them from the original 2.1 or 2.2 PLC firmware to 2.4 then 2.6 then 2.7 and finally to 2.8.

 

The performance and stability increased quite a lot. about 30% more sync speed and zero packet loss or drop in function.

 

Some notes:

The TL-PA8010P retains all its functionality available via the TpPLC utility ( change led status, power saving mode, etc )

The TL-PA8630 loses the following functionality ( led status cannot be changed, power saving mode cannot be disabled )

 

I belive that the TL-PA8630 loses these functions because I used the firmware for the TL-PA8010P to flash it. The one supplied for the TL-PA8630 fails to install ( without any problem to the device ).

 

Anyway, just clearing out things for anyone interested in knowing more.

 

I also have some TL-PA411 AV500 that were on TP-LINK original 1.1 firmware version. I have upgraded them to the 1.5 version supplied by Qualcomm to other manufacturers and it is now an AV600 device with perfect stability and much faster.

 

 

 

 

 

 

 

 

 

 

  1  
  1  
#8
Options
Re:Firmware for TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-06-02 14:35:13

@PowerlineFW 

 

I tried the file from mega site referenced for PA8030 and combined with a pib file from tp-link site but the update failed.

  0  
  0  
#9
Options
Re:Firmware for TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-06-02 14:49:27

@JohnCW 

 

What device are you trying to update, the PLC only or the PLC+WiFi device?

And what hardware versions are they?

  0  
  0  
#10
Options
Re:Firmware for TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-06-02 15:25:30

@turboleak 

 

Model TL-PA8030P(US) Ver 1.0

 

This is non-wifi model.

  0  
  0  
#11
Options

Information

Helpful: 7

Views: 33003

Replies: 116

Related Articles