Tether only sees 1 AP when I actually have 2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tether only sees 1 AP when I actually have 2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AtLarge

2023-06-25 20:47:27 - last edited 2023-06-25 21:16:22

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-12-17

Tether only sees 1 AP when I actually have 2

2023-06-25 20:47:27 - last edited 2023-06-25 21:16:22

Model: RE355

Hardware Version: V1

Firmware Version: 1.0.0 Build 20180204 Rel. 61695

Hello, I have an ASUS RT-AX88U as my router. I also have an RE355 and an RE650. Both are set up as access points and using the ethernet port to the router. Everything is working fine and as it should. I try connect to the RE355 and when I use the Tether application on my phone it only sees the RE650 and the RE355 is an Unknown Range Extender and does not show it's MAC number.

Because of this, I cannot log in to manage it from my Iphone. Only if I go direct through my PC by IP address.

Is this a limitation of the Tether app or can this be fixed?

1 Reply

AtLarge

LV1

2023-06-26 16:57:13

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-12-17

Re:Tether only sees 1 AP when I actually have 2

2023-06-26 16:57:13

Hi, are the RE355 and RE650 DHCP still configured as Auto? If so, please turn them off and test if it solves the problem. Unfortunately, this did not resolve my issue. I changed both the RE355 and RE650 to DHCP off and rebooted. Rebooted the router. Reinstalled the tether app. Still only shows the RE650 and I can only access the RE355 by using the TP-Link website. Not through the Tether app. Any other suggestions?

Tether only sees 1 AP when I actually have 2

Tether only sees 1 AP when I actually have 2

Information

Voters 0

Tags