Installing the powerline tpPLC app on your Windows computer

Released On: 2020-11-19 17:55:22Last update time: 2020-11-19 17:56:12

Step 1 Install the utility.


1) Go to the download center and download the tpPLC Utility package. If you can’t find it, you may also search for the model of your devices, click Support, then click on Utility.


2) Double-click the package and follow the setup wizard to install the utility.

Note: WinPcap (version 4.1.2 or higher) is required for the tpPLC Utility. If it is not found on your computer, the wizard will guide you to install it.


3 ) Wait until the installation is completed. The following icon will appear on your desktop.


Step 2 Double-click the tpPLC icon to open the utility.


Step 3 Simply connect your computer to a powerline device via an Ethernet cable or wirelessly.

Then the utility will show you the powerline network, with the local powerline device at the bottom and remote powerline devices above it.


1. If the utility cannot detect the adapter, please disable/uninstall firewall and anti-virus on your computer first, then re-install the utility.


2. You can click each device to view the current powerline data rates. If you see a red line between the two devices, move either device to another location and check the rates again.



0 Unhelpful Bookmark

Not works throught usb-c ethernet adapter.