Certain band disappears when using WDS bridge on C2300 V1
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Certain band disappears when using WDS bridge on C2300 V1
Model :
Hardware Version :
Firmware Version :
ISP :
Hi all,I bought a new C2300 and when I do use the WDS bridge mode on the 5ghz of the C2300 to the 5ghz of the root router, the 5ghz ssid of the C2300 disappears and so I can only see the 2.4 ghz ssid being broadcast by the C2300.It also happens when I WDS bridge the 2.4GHZ of the C2300 to the 2.4 ghz of the root router then what happens is that the 2.4ghz ssid of the C2300 disappears and I can only see the 5GHz of the C2300 being broadcastPlease note that I did check that the both radio bands are enabled and broadcast is unhidden in the setup screen and I am using the latest firmware.Any help guys why this is happening?
Hardware Version :
Firmware Version :
ISP :
Hi all,I bought a new C2300 and when I do use the WDS bridge mode on the 5ghz of the C2300 to the 5ghz of the root router, the 5ghz ssid of the C2300 disappears and so I can only see the 2.4 ghz ssid being broadcast by the C2300.It also happens when I WDS bridge the 2.4GHZ of the C2300 to the 2.4 ghz of the root router then what happens is that the 2.4ghz ssid of the C2300 disappears and I can only see the 5GHz of the C2300 being broadcastPlease note that I did check that the both radio bands are enabled and broadcast is unhidden in the setup screen and I am using the latest firmware.Any help guys why this is happening?
