OneMesh- RE305 not connecting to Archer A6 in 5Ghz network
Hi,
I have bought A6 router and RE305 wifi extender to configure it work in Onemesh mode. Once setup is complete , i noticed that Extender is not connecting to Wifi Router in 5ghz mode and this leads to it connecting in 2.4ghz and me receiving very slow internet as speed is limited to 55Mbps in 2.4ghz.
Please let me know how wifi extender will connect to 5ghz mode in onemesh setup
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The 5G does not have the distance the 2.4G has so you may be too far from the router. Set up the extender in the same room of the router to see if both bands connect, then move it to a closer area then where it was previously.
- Copy Link
- Report Inappropriate Content
Hi ,
I have now disabled Smart Connect feature which has led to 2 SSID i.e 2.4ghz and 5ghz on OneMesh. Then i updated the Channel to 44 manually for 5ghz , post that Repeater is able to connect on 5ghz with main router from its current location.
But if i enable Smart Connect back again to use the feature of having 1 SSID then its not connecting on 5ghz frequence with main router and speeds are low because of it
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi Tony,
Please find below the firmware and hardware version on RE305
Hardware Version -RE305 v3.0
Firmware Version - 1.1.2 Build 20200212 Rel. 67183
Regards,
Antony Joseph
- Copy Link
- Report Inappropriate Content
Please update to the latest version here, and set up the device again: https://static.tp-link.com/2020/202008/20200831/RE305(V3)_200715.zip
Here is a FAQ on how to update the firmware: https://www.tp-link.com/us/support/faq/1406/
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1569
Replies: 5
Voters 0
No one has voted for it yet.