can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?
can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?
2020-09-20 16:51:16 - last edited 2020-10-07 15:09:57
Model: Archer AX50  
Hardware Version: V1
Firmware Version: 1.0.9 Build 20200708 rel.55037(5553)

I just installed iOS 14.0 and now I'm getting a weak security notice on my Apple devices:

 

"WPA/WPA2 (TPIK) is not considered secure. If this is your Wi-Fi network, configure the router to use WPA2 (AES) or WPA3 security type."

 

Can this be addressed with a firmware upgrade? If so, is it on the product roadmap?

 

Many thanks.

  2      
  2      
#1
Options
1 Accepted Solution
Re:can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?-Solution
2020-10-06 15:03:29 - last edited 2020-10-07 15:09:57

@Lee_Grey 

 

Here you go

 

Recommended Solution
  0  
  0  
#9
Options
22 Reply
Re:can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?
2020-09-21 21:17:42 - last edited 2020-10-07 15:09:40

@WilliamWallace 

 

Log into your router, go to Advanced > Wireless > Wireless Settings > For both 2.4G and 5G select WPA2-PSK and AES, then hit save. That should get rid of the notification.

  0  
  0  
#2
Options
Re:can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?
2020-09-21 21:51:12

@Tony 

 

Thank you.  That change got rid of the "weak security" notification on both channels.

The 2.4 ghz channel looks good now - no notifications at all.

However, the 5 ghz channel is now showing a "Privacy Warning" notification that says:

"This network is blocking encrypted DNS traffic.  The names of websites and other servers your device accesses on this network may be monitored and recorded by other devices on this network."

I checked the setup of both again and confirmed that I made only the changes you directed.  Odd that it's only on the 5 ghz band and not both.  What do you think is causing this?

  0  
  0  
#3
Options
Re:can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?
2020-09-22 23:03:27

@WilliamWallace 

 

I'm wondering if that could be a byproduct of utilizing AES. The 5G and 2.4G reference the same router so to get that on the 5G and not 2.4G does not make sense. I would probably look up the software being used to see if others have seen that message and clues that could come from it.

  0  
  0  
#4
Options
Re:can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?
2020-09-23 16:45:18 - last edited 2020-10-07 15:09:14

@Tony 

Thanks Tony.  Well what do you know...after restarting the modem a couple of times over the last few days appears to have fixed the problem.  I'm not getting messages on my iPhone anymore.  Go figure.  Thank you for your assistance.

  1  
  1  
#5
Options
Re:can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?
2020-10-01 23:32:09

@Tony 

 

I have this same problem, but I do not seem to have the options you present.  I am using the latest Deco app (Version 2.2.2) for my M5 3-node mesh.  I just downloaded the app about ten minutes ago. Under advanced, I have Fast Roamong, beamforming, LED Control, Operating Mode, Connection Alerts, and Notifications.  Am I looking in the wrong place?

 

 

  0  
  0  
#6
Options
Re:can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?
2020-10-02 22:30:08

@VeryUniqueName 

 

You have a Deco, not an Archer router. The AES option for Deco is seen by tapping the password on the wireless menu.

  0  
  0  
#7
Options
Re:can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?
2020-10-05 17:36:45

Please can someone help.

 

I have a Archer C60 Ver - 2.0.0 Build 20161206 rel.60287.

 

I have an iPhone 11 and get the "Weak Security" Notification.

 

Please advise how to setup?

 

Note: Im not in IT and require step by step instructions.

 

Thanx

  0  
  0  
#8
Options
Re:can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?-Solution
2020-10-06 15:03:29 - last edited 2020-10-07 15:09:57

@Lee_Grey 

 

Here you go

 

Recommended Solution
  0  
  0  
#9
Options
Re:can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?
2020-10-07 08:08:13

@WilliamWallace - What Router do you have?

  0  
  0  
#10
Options
Re:can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?
2020-10-07 15:04:19

@WilliamWallace tp-link archer ax50

I followed Tony's instructions to switch to AES and after restarting the modem and router a few times, the message dissapeared.

  0  
  0  
#11
Options

Information

Helpful: 2

Views: 14605

Replies: 22

Related Articles