How to set up trunking mode on Qnap TS-451?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to set up trunking mode on Qnap TS-451?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to set up trunking mode on Qnap TS-451?
How to set up trunking mode on Qnap TS-451?
2020-10-28 18:21:05
Model: Archer AX6000  
Hardware Version: V1
Firmware Version: 1.1.1 Build 20200714 rel.18254

i set up  trunking mode on AX6000 . 

 

Qanp model :

Adapter 1+2 (1GbE, 1GbE)

802.3ad dynamic

 

 

problem is when i put Qnap lan into rotour's Lan2 and Lan3 , Qanp cant get internet . 

But if i let Qnap conncet on Lan2 Lan 5 can get internet ,but qnap will show conncet wrong .

  0      
  0      
#1
Options
3 Reply
Re:How to set up trunking mode on Qnap TS-451?
2020-10-29 22:56:46

@AJ_Hsieh 

 

LACP will not work, you need to use something like balance xor.

  0  
  0  
#2
Options
Re:How to set up trunking mode on Qnap TS-451?
2020-10-31 13:39:27

@Tony 

 

Thanks .  You show me the right way !!

 

AX6000 didn't support 802.03AD .

 

but when i use your suggest  Balance-xor still has some problem .

 

system show me : Adapter and all adapters failed to connect to the internet cheching NCSI .

 

Would u tell me what can i do ?

 

File:
截圖 2020-10-31 下午6.36.45.pngDownload
  0  
  0  
#3
Options
Re:How to set up trunking mode on Qnap TS-451?
2020-11-05 23:18:10

@AJ_Hsieh 

 

Another link aggregation method you can try is static LAG.

 

So either static LAG or balanced XOR would be the way to go.

 

If you followed the following method: https://www.qnap.com/en/how-to/tutorial/article/set-port-trunking-on-your-qnap-nas-to-increase-the-bandwidth-via-802-3ad-protocol/

 

I would possibly reach out to the NAS manufacturer to see what other settings may need to be done. 

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1232

Replies: 3

Related Articles