Home Network Community > All Threads > Setting UP AC1900 hard wired connection between router and computer
< All Threads

Setting UP AC1900 hard wired connection between router and computer

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Setting UP AC1900 hard wired connection between router and computer

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Setting UP AC1900 hard wired connection between router and computer
Setting UP AC1900 hard wired connection between router and computer
2020-12-28 02:56:19

I have bought a AC1900 (AC1900) to replace my existing TP router. My present router is hard wired to my computer because the computer does not have wifi capability. 

 

I have looked at the instructions and it goes into great detail on connecting the router wirelessly but very little on connecting it from router to computer by hardwire. The insturctions do show a hardwired connection between the router and the computer and says it is method 2. After this there is no mention of method two. 

 

Is there a location on the web which gives details (step by step) on doing this??

  0      
 
  0      
 
#1
Options
3 Reply
Re:Setting UP AC1900 hard wired connection between router and computer
2020-12-28 13:02:01

@PeteShiflett 

 

What is the actual model number? AC1900 is for a few, A9, C9, etc.

 

There should be LAN ports on the back of router, use those to connect a PC that is wired is the normal method.

  0  
  0  
#2
Options
Re:Setting UP AC1900 hard wired connection between router and computer
2020-12-28 15:24:53

@IrvSp 

 

My model is Archer A8. I haven't opened the package. Yes it does have a lan port but the instructions I see on line and the manual itself do not give any details on connecting it thru the lan.

 

The TP-link router I'm replacing had instructions to set it up with a lan. I typed in the 192.168.0.1 in the browser and went thru the setup. Can I do the same with the Archer A8?

 

If so is it the same address, 192.168.0.1?

  0  
  0  
#3
Options
Re:Setting UP AC1900 hard wired connection between router and computer
2020-12-28 19:20:56

@PeteShiflett 

 

The A8 User's Guide does tell you how to do it, although not directly.

 

TP-Link has sort of switched to using the phone/tablet app using wifi via Tether for the routers now it seems.

 

The User's Guide is at https://static.tp-link.com/2020/202011/20201116/1910012778_Archer%20A8_UG_V1.pdf

 

Chapter 4 on page 15 tells you how. Chapter 4.3 tells you how to do it manually. All you need do is plug the PC's ethernet cable into on of the LAN ports on the back of the router and follow the instructions.

 

Not all routers might assign 192.168.0.1, some may use 192.168.1.1 or something else even.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1502

Replies: 3

Related Articles
Hard wired connection slower than Wi-fi
1519 0
Deco loses connection to HARD WIRED devices when Internet is out
311 0
Wireless and wired connection
198 0
Wired connection
655 0
How to use Archer A9 (AC1900) as a wired repeater?
2334 1
hard connection for the mobile that was used in tether
445 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.