Powerline Adapter Same Circuit???
Trying to connect these 2 units. As long as they are in the same room they connect fine. When I move one to the other end of the house it will not connect. Both power circuits are fed from same breaker box. On different breakers.
Do they have to be on the same side of the 220 input to the breaker box? That's the only thing I can think of that is different between the 2 breakers.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
As long as the two outlets are powered by breakers in the same panel that powerline kit should be working. What lights are lit and what color when the remote unit is in the far end outlet?
- Copy Link
- Report Inappropriate Content
@Carl Well this is the most confusing thing ever.
On that particular breaker there are 7 outlets. on 4 of the seven the unit works fine. The other 3 it won't work. Those 3 are on both sides of the same wall.
They all have power and according to my tester they are wired correctly. There is nothing special plugged into any of them except a couple of usb chargers. Unplugging the chargers didn't make any difference.
Any ideas as to what could cause that sort of problem?
I always get a power light. I get the ethernet light when the ethernet is hooked up. I get the powerline light when it connects. On the ones it won't connect I don't get the powerline light but get the other 2 lights.
Thanks for any help,
Jim
- Copy Link
- Report Inappropriate Content
Found the culprit. The device I wanted to use this with is a Tablo OTA device. Apparently if it is within a foot or so of the Link adapter it causes some sort of interference. If I get it further away then it is ok. I haven't hooked up the ethernet cable yet to see if that will kill it again. But will do so soon.
Thanks again,
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3537
Replies: 4
Voters 0
No one has voted for it yet.