How to set up 2.4GHz wifi network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to set up 2.4GHz wifi network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to set up 2.4GHz wifi network
How to set up 2.4GHz wifi network
2022-02-22 23:53:10 - last edited 2022-02-24 07:44:39
Model: TL-WR940N  
Hardware Version: V6
Firmware Version:

Hi there!

I just got this routeryesterday and set it up, i just used the auto setup and it worked just fine. Then i look through all the settings to to make sure its running on 2,4GHz but I dont see any 2.4GHz or 5GHz settings.

So is it right to assume that this router operates in the 2.4GHz range only and not 5GHz, or are there settings to pick which I want?

  0      
  0      
#1
Options
1 Accepted Solution
Re:How to set up 2.4GHz wifi network-Solution
2022-02-23 14:30:33 - last edited 2022-02-24 07:44:39

  @Stonehaven 

 

If the router listed is the one you have, then yes, it is ONLY a 2.4Ghz router.

 

See the Spec's @ https://www.tp-link.com/us/home-networking/wifi-router/tl-wr940n/#specifications

 

WIRELESS
Standards Wi-Fi 4
IEEE 802.11n/b/g 2.4 GHz
WiFi Speeds

N450
2.4 GHz: 450 Mbps (802.11n)

 

Also your router manual is here, https://www.tp-link.com/us/user-guides/TL-WR940N_V6/

 

As far as SSID's, there are only 2, the standard 2.4Ghz, and 1 2.4Ghz Guest SSID.
 

You can changes things like Security and some wireless parameters, but it is only for the 2.4Ghz band.

Recommended Solution
  4  
  4  
#2
Options
2 Reply
Re:How to set up 2.4GHz wifi network-Solution
2022-02-23 14:30:33 - last edited 2022-02-24 07:44:39

  @Stonehaven 

 

If the router listed is the one you have, then yes, it is ONLY a 2.4Ghz router.

 

See the Spec's @ https://www.tp-link.com/us/home-networking/wifi-router/tl-wr940n/#specifications

 

WIRELESS
Standards Wi-Fi 4
IEEE 802.11n/b/g 2.4 GHz
WiFi Speeds

N450
2.4 GHz: 450 Mbps (802.11n)

 

Also your router manual is here, https://www.tp-link.com/us/user-guides/TL-WR940N_V6/

 

As far as SSID's, there are only 2, the standard 2.4Ghz, and 1 2.4Ghz Guest SSID.
 

You can changes things like Security and some wireless parameters, but it is only for the 2.4Ghz band.

Recommended Solution
  4  
  4  
#2
Options
Re:How to set up 2.4GHz wifi network
2022-02-24 20:47:08

  @IrvSp Thanks for the info!

  1  
  1  
#3
Options

Information

Helpful: 0

Views: 1338

Replies: 2

Related Articles