Ring 2 wireless doorbell and AX50 wont connect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Ring 2 wireless doorbell and AX50 wont connect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Ring 2 wireless doorbell and AX50 wont connect
Ring 2 wireless doorbell and AX50 wont connect
2022-05-08 12:48:04 - last edited 2022-05-18 11:54:27
Model: Archer AX50  
Hardware Version: V1
Firmware Version: 1.0.11 Build 20210730 rel.54485(4555)

Hi all

 

Having a nightmare trying to get a ring doorbell to connect to a archer ax50, was previously working on a asus nu56

 

tried so far-

 

  • channel width setting's
  • channel numbers
  • port forwarding
  • security settings
  • wifi modes
  • other routers set as access points
  • 3 different extenders
  • security firewall off
  • guest point

 

something on this router will just not let the ring 2 connect and i am totally fed up now and thinking of returning the router and buying a different brand

  0      
  0      
#1
Options
1 Accepted Solution
Re:Ring 2 wireless doorbell and AX50 wont connect-Solution
2022-05-08 14:32:03 - last edited 2022-05-18 11:54:27

Fixed it.

 

Got the Ring mac address from the Ring app.

 

Found the IP on TP Link browser admin matching to the mac address.

 

Bound them together to stop changes in future.

 

Added port forwards in Nat Forwarding/ Virtual servers using the ip I found and bound to the Ring.

 

Ports

Traffic type

Protocol

15063/15064

SIP

TCP/UDP

9998/9999/6970

RSS

TCP

16500-65000

RTP

UDP

7076/7077

App

UDP

9078/9079

App

UDP

 

^that will be 10 entries

 

It still wont connect through a TPLink Extender but does connect direct to the AX50 2.4 wireless network.

 

This has taken the best part of a day with lots of hair pulling and ring camera bashing so I hope it helps someone in future!

 

Recommended Solution
  4  
  4  
#2
Options
1 Reply
Re:Ring 2 wireless doorbell and AX50 wont connect-Solution
2022-05-08 14:32:03 - last edited 2022-05-18 11:54:27

Fixed it.

 

Got the Ring mac address from the Ring app.

 

Found the IP on TP Link browser admin matching to the mac address.

 

Bound them together to stop changes in future.

 

Added port forwards in Nat Forwarding/ Virtual servers using the ip I found and bound to the Ring.

 

Ports

Traffic type

Protocol

15063/15064

SIP

TCP/UDP

9998/9999/6970

RSS

TCP

16500-65000

RTP

UDP

7076/7077

App

UDP

9078/9079

App

UDP

 

^that will be 10 entries

 

It still wont connect through a TPLink Extender but does connect direct to the AX50 2.4 wireless network.

 

This has taken the best part of a day with lots of hair pulling and ring camera bashing so I hope it helps someone in future!

 

Recommended Solution
  4  
  4  
#2
Options

Information

Helpful: 0

Views: 1189

Replies: 1

Related Articles