Archer A6 v3.0 regular disconnects: led-controller[774]: <6> 288051 Start to run WAN0_OFF
Hello. I've been having an issue for a while now where the internet has been dropping out for a few minutes fairly regularly. It is setup in router mode to an ARRIS SURFboard SB8200-RB . Was having the problem on the last firmware (1.0.14) which was the original. New firmware showing same issues. ISP is Comcast/Xfinity
Here is the most recent log since I cleared the log at ~2am
####################################################################
# Archer A6 System Log
# Time = 2023-04-01 10:27:52
# H-Ver = 3.0.0 ; S-Ver = 1.0.15 Build 20220923 rel.62166
# LAN: I = 192.168.1.1 ; M = 255.255.255.0 ; MAC = CC:32:E5:01:BE:69
# WAN: W = dhcp ; I = 73.78.25.41 ; M = 255.255.254.0 ; MAC = CC:32:E5:01:BE:6A
# G = 73.78.24.1 ; D1 = 75.75.75.75 ; D2 = 75.75.76.76
# Clients connected: 33 ; WI-FI : 32
####################################################################
2023-04-01 09:04:32 led-controller[774]: <6> 288051 Start to run WAN1_ON
2023-04-01 09:04:32 led-controller[774]: <6> 288051 Start to run WAN0_OFF
2023-04-01 09:04:32 led-controller[774]: <6> 288051 Start to run LAN_ON
2023-04-01 09:04:30 led-controller[774]: <6> 288051 Start to run WAN1_ON
2023-04-01 09:04:30 led-controller[774]: <6> 288051 Start to run WAN0_OFF
2023-04-01 09:04:30 led-controller[774]: <6> 288051 Start to run LAN_OFF
2023-04-01 07:48:33 led-controller[774]: <6> 288051 Start to run WAN1_ON
2023-04-01 07:48:33 led-controller[774]: <6> 288051 Start to run WAN0_OFF
2023-04-01 07:48:33 led-controller[774]: <6> 288051 Start to run LAN_ON
2023-04-01 07:48:31 led-controller[774]: <6> 288051 Start to run WAN1_ON
2023-04-01 07:48:31 led-controller[774]: <6> 288051 Start to run WAN0_OFF
2023-04-01 07:48:30 led-controller[774]: <6> 288051 Start to run LAN_OFF
2023-04-01 03:08:53 led-controller[774]: <6> 288051 Start to run WAN1_ON
2023-04-01 03:08:53 led-controller[774]: <6> 288051 Start to run WAN0_OFF
2023-04-01 03:08:53 led-controller[774]: <6> 288051 Start to run LAN_ON
2023-04-01 03:05:37 led-controller[774]: <6> 288051 Start to run WAN1_OFF
2023-04-01 03:05:37 led-controller[774]: <6> 288051 Start to run WAN0_ON
2023-04-01 03:05:37 led-controller[774]: <6> 288051 Start to run LAN_ON
2023-04-01 02:31:18 led-controller[774]: <6> 288051 Start to run WAN1_ON
2023-04-01 02:31:18 led-controller[774]: <6> 288051 Start to run WAN0_OFF
2023-04-01 02:31:18 led-controller[774]: <6> 288051 Start to run LAN_ON
2023-04-01 02:30:33 led-controller[774]: <6> 288051 Start to run WAN1_OFF
2023-04-01 02:30:33 led-controller[774]: <6> 288051 Start to run WAN0_ON
2023-04-01 02:30:33 led-controller[774]: <6> 288051 Start to run LAN_ON
2023-04-01 02:28:03 led-controller[774]: <6> 288051 Start to run WAN1_ON
2023-04-01 02:28:03 led-controller[774]: <6> 288051 Start to run WAN0_OFF
2023-04-01 02:28:03 led-controller[774]: <6> 288051 Start to run LAN_ON
2023-04-01 02:26:33 led-controller[774]: <6> 288051 Start to run WAN1_OFF
2023-04-01 02:26:33 led-controller[774]: <6> 288051 Start to run WAN0_ON
2023-04-01 02:26:33 led-controller[774]: <6> 288051 Start to run LAN_ON
I have gone through some searching and other similar topics, but have not found anything to work.
Any suggestions?