Archer BE800 Router LAN IP Settings

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer BE800 Router LAN IP Settings

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer BE800 Router LAN IP Settings
Archer BE800 Router LAN IP Settings
2023-06-21 11:35:39
Model: Archer BE800  
Hardware Version: V1
Firmware Version: 1.0.2

I have a new TP-Link/Archer BE800 router. I’m trying to enter LAN static IP addresses for several Ethernet connected devices (PCs, printers). The static IP address for each of these devices must to be in the range 192.168.1.11 to 192.168.1.91.

 

The default “IP Address Pool” setting in the router is 192.168.0.2 to 192.168.0.253. When I try to change the upper end of the range to 192.168.1.253 I get this error message: The IP address pool and LAN IP address should be in the same subnet.

 

How can I change the IP Address Pool settings so that it includes the range 192.168.1.11 to 192.168.1.91? The Pool range can go lower and/or higher if necessary but it must include that range. I can’t seem to find a range that is accepted on the settings screen.

 

Thanks.

  0      
  0      
#1
Options
1 Reply
Re:Archer BE800 Router LAN IP Settings
2023-06-25 06:33:40

  @PMokover 

 

Hi, 

 

By default, the router LAN IP is 192.168.0.1 with subnet mask 255.255.255.0, so its DHCP address pool can only be 192.168.0.x, if you would like to use 192.168.1.x as the address pool, please change the router LAN IP to 192.168.1.1 first on Advanced->Network->LAN page:

 

39fa31762522432ab1545ea03388b23e

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 1022

Replies: 1

Related Articles