Tether only sees 1 AP when I actually have 2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tether only sees 1 AP when I actually have 2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Tether only sees 1 AP when I actually have 2
Tether only sees 1 AP when I actually have 2
2023-06-25 20:47:27 - last edited 2023-06-25 21:16:22
Model: RE355  
Hardware Version: V1
Firmware Version: 1.0.0 Build 20180204 Rel. 61695

Hello, I have an ASUS RT-AX88U as my router.  I also have an RE355 and an RE650.  Both are set up as access points and using the ethernet port to the router.  Everything is working fine and as it should.  I try connect to the RE355 and when I use the Tether application on my phone it only sees the RE650 and the RE355 is an Unknown Range Extender and does not show it's MAC number.

 

Because of this, I cannot log in to manage it from my Iphone.  Only if I go direct through my PC by IP address.

 

Is this a limitation of the Tether app or can this be fixed?

  0      
  0      
#1
Options
1 Reply
Re:Tether only sees 1 AP when I actually have 2
2023-06-26 16:57:13
Hi, are the RE355 and RE650 DHCP still configured as Auto? If so, please turn them off and test if it solves the problem. Unfortunately, this did not resolve my issue. I changed both the RE355 and RE650 to DHCP off and rebooted. Rebooted the router. Reinstalled the tether app. Still only shows the RE650 and I can only access the RE355 by using the TP-Link website. Not through the Tether app. Any other suggestions?
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 359

Replies: 1

Related Articles