Home Network Community > All Threads > Lost the tag on my router from the factory with the reset password.
< All Threads

Lost the tag on my router from the factory with the reset password.

Lost the tag on my router from the factory with the reset password.

Lost the tag on my router from the factory with the reset password.
Lost the tag on my router from the factory with the reset password.
2024-05-26 21:08:46
Model: Archer C54  
Hardware Version: V1
Firmware Version: Unsure

I reset my router and it did not realize that I had lost the tag that was on the bottom of the router when I purchased it that had the default password listed on it . I do have the original packaging and have tried a couple of the numbers on there with no with no luck any suggestions would be greatly appreciated. I'm setting it up as an extender and I used admin but that didn't work either

  0      
 
  0      
 
#1
Options
1 Reply
Re:Lost the tag on my router from the factory with the reset password.
2024-05-28 11:08:12 - last edited 2024-05-28 11:08:28

  @Marksym 

 

Upon successful reset connect a computer to your C54 LAN port and do the initial setup (set an admin password). Then you can change its operation mode and continue setting up the router.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 352

Replies: 1

Related Articles
NFC Tag
886 1
Router resets itself to factory default
3465 0
Should you unbind the router before a factory reset
712 0
Factory reset issue
1073 0
Power off resets entire router to factory settings
978 2
Factory reset
620 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.