Hello team, Can you please share an update on upcoming app improvements for the Deco BE95? It has been a while since the last major release and the system is currently having several issues, especially with a few limitations in the Deco app that make it hard to properly tune 2.4, 6 GHz and MLO:

1. 2.4 and 6 GHz Channel & Frequency Management

   • The app does not allow full control of 6 GHz channels and width in a clear way.

   • If you disable the 6 GHz network on your main or dedicated SSID, the MLO SSID can still use 6 GHz in the background.

   • There is currently no way to adjust 6 GHz parameters (channel, width, etc.) specifically for the MLO SSID.

   • If we don't want to use 2.4 GHz on main SSID and its disabled there, there is no way to manage Channel, width at the IoT network level.

2. Network Optimization Behavior & Visibility

   • When running “Network Optimization,” the app automatically applies new channels without showing what is going to be changed beforehand.

   • It would be very helpful if, after the scan, the app prompted a summary of the proposed changes (for example: “2.4 GHz → Channel X, 5 GHz → Channel Y, 6 GHz → Channel Z”) and asked for confirmation before applying them.

   • If 6 GHz is disabled on the main SSID but MLO is still active, the optimization report only shows changes for 2.4 and 5 GHz. It does not show what optimizations are being applied to 6 GHz, even though 6 GHz is still in use via MLO.

3. Fast Roaming Configuration per SSID / Band

   • It would be very useful if Fast Roaming could be enabled or disabled per SSID or per band, instead of only as a global setting.

   • For example, being able to disable Fast Roaming on 2.4 GHz networks (to avoid issues with older / legacy devices that don’t fully support it), while keeping Fast Roaming enabled for 5 GHz and 6 GHz SSIDs so that newer devices can still benefit from faster, smoother roaming.

These improvements would greatly help advanced users to troubleshoot roaming issues, optimize performance for modern Wi-Fi 7 devices, and better understand how MLO and 6 GHz are being handled by the system.

Thank you in advance for any roadmap information and for considering these feature requests.