@srand15 The switch does not use an IP address so that and the TV could be left alone. My apologies, I meant in assigning a static IP for the cable box. I found this in the guide which shows how,...

@MemoirsOzeus Devices connected through the extender will have a different MAC address compared to their original one. The first half of the MAC should at least be the same as the device's actual...

@Steel_Rat Go into the settings of the Kasa app and resync the time, then look at the device settings to see if that is corrected. Alternatively, you can modify the time zone to compensate for the...

@Fuzzy_Bear The devices are bound to whichever email account they were originally set up with. When open Kasa on your new phone, make sure to log into the same email account used to set up the...

@hanmari Power down then power up every node, and try the update again in the Deco app. If that fails, go to the support page of the Deco and download the oldest firmware version which should be...

@Bernie100 Look at the LED indicators to make sure the 2.4G and 5G are green. If not, factory reset the extender and set it up again to the router. Other things to try is to reset the extender, then...