HS200 causing GFCI to trigger.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Re:HS200 causing GFCI to trigger.
2020-11-30 18:18:46

@Voodoodriver needing help with a similar situation that you experienced hooking up your HS200 with a GCFI.  I have neutrals going into the back of the GCFI one from the LINE and one from the LOAD.  What neutral do I conect the neutral from the SWITCH to?

0
0
#15
Options
Re:HS200 causing GFCI to trigger.
2020-11-30 18:38:22

@AG15 The neutral on the LOAD side connects only to the switch.

0
0
#16
Options
Re:HS200 causing GFCI to trigger.
2021-09-11 21:31:27

@bucktim I had a switch wired on the load side of a gfci plug. When putting the wifi switch in instantly trips gfci. Went through several plugs and switches before finding this is a deeper issue. Any real work around yet that enables this switch to remain protected?

0
0
#18
Options
Re:HS200 causing GFCI to trigger.
2021-09-11 22:37:11
Problem solved!! Simply move the white neutral wire from the wifi switch to the load side of your GFCI on the neutral side with the neutral of your device you’re operating. So simple yet very frustrating.
2
2
#19
Options