HS105 units don't auto-reconnect after losing WiFi connection
I have four HS105 units and one HS107. Some of the HS105s very frequently lose their connection with the WiFi. Mostly it is the two which are in a different room than my router, but sometimes even the ones in the same room as the router lose connection. In fact, right now all four of the HS105 have lost connection; only the HS107 is online.
I can understand them losing connection from time to time but I would think they would automatically try to receonnect with the router. They don't do that; once the connection is lost they don't reconnect by themselves. If I unplug the Smart Plug and plug it in again, it joins the network just fine. I have to do this about every other day.
The HS105 are all at firmware version 1.5.1, hardware version 1.0. The one which is the furthest away from the router shows a signal strength around -64 dBm.
Is there any way to make these devices auto reconnect with the router?
So far, I haven't had this problem with the HS107. It is hardware version 1.0 and firmware 1.0.5. I can't find signal strength for the HS107 in the app.
=================================================================================
RESOLUTION: I'm putting my resolution here so you don't have to read through the whole thread to find out what happened.
On or about 2019-01-16 I received beta firmware version 1.5.3 for the HS105s. Since installing that I have not experienced this problem. I have only occasionally seen the plugs lose connection since then, but they do auto-reconnect now. So at least for me the auto-reconnect problem was fixed by firmware 1.5.3.
BTW, my HS105 units are now running firmware 1.5.4.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I'm on an Archer C3200 router, which is a TP-Link product.
- Copy Link
- Report Inappropriate Content
@NikD63 Hopefully someone from tplink is monitoring this forum.
- Copy Link
- Report Inappropriate Content
@bschatzow I'm using a BT Smart Hub AC 2600 - fairly common here in the UK. I also had a TP-Link 24-Port gigabit switch, but I've since taken it out of the equation with no improvement. I think it's a bit silly for them to blame the router if no other devices are having issues with it. If everything else can cope with it, why can't their plugs? And why can't they automatically POR as a temporary fix without us having to do it to manually recover them...
- Copy Link
- Report Inappropriate Content
@bschatzow, Carl from tplink was monitoring this thread back when I was still having issues. I don't know if he still is; the last post from him I see is from June 2019.
- Copy Link
- Report Inappropriate Content
@NikD63 I linked this thread to my support emails. They have not responded to this either.
- Copy Link
- Report Inappropriate Content
The same problem.... after almost one year with those devices... managed by Alexa App and configured by Kassa App, I really hate them because all the time that there are a WiFi lost I have to unplug and plug foe reconnections.... I did try to firmware upgrade and nothing work... if the problem doesn't solve ... I will change to other brand
- Copy Link
- Report Inappropriate Content
I am having this exact issue, and have been, every time our router craps out and reboots, the Kasa HS100 does not reconnect, it just sits there with a red LED until I power cycle it, quite frustrating.
- Copy Link
- Report Inappropriate Content
I finally gave up. I trashed all my TP-Link Kasa plugs and bought Wyse plugs. I haven't had a reconnect problem since - about a month. With the TP-Link plugs I would have had to unplug them a dozen times in a month.
The Wyse plugs do not have a native sunrise/sunset option but IFTTT works great. Another bit*h I had with TP-Link is no offset option for the sunrise/sunset but the IFTTT trigger allows me to select my location on a map. I just select a location a little east or west of me and I can fine-tune the sunrise/sunset function. Technically you could do that with TP-Link but it's much more cumbersome as you have to play with Lat/Long trial and error.
- Copy Link
- Report Inappropriate Content
I gave up on Kasa as well. I've spent way too much money on these plugs. I've used them in 3 different network configurations, even replacing one expensive router with another to see if that was the issue. Nope. I replaced them with Gosund plugs and have had zero issues. I really wanted Kasa to work, particularly because I liked the interface with the little app. But after ruling out everything else, I've determined the plugs were in fact the issue.
- Copy Link
- Report Inappropriate Content
I've purchased a lot of TP-link hardware in the past but the manufacturer's inability or carelessness has made me rethink any future purchases. I'm going to find new suppliers.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 39783
Replies: 87