HS210 Light turns on and then off. HELP!
I am trying to Install HS210 into a 3-way light switch for house lights (not LED) with no dimmer. Once I get through the setup, I can control the switch successfully (in app and can hear click on switch), but the light comes on for a brief second and then turns off.
I’ve attached a photo of the wires going into my two existing light switches that have different colors. The playroom has grey, black & red (with a white wire in the box but not connected). The dining room has black, white and red. Both have ground wires not attached.
I tried to to find a solution in the community posts but only seem to find others having the issue without a reply of how it was fixed. I’ve tried lots of different wiring but none resolved it. Please help!
Hopefully this can be the post where others can find an answer.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@B.Will You Are A Genius!! Thank you so much!! That worked like a charm. Thank you for your help. I wouldn’t have figured that out. So for anyone else with issues I suggest posting a phot of the ‘before’ wiring.
@B.Will I am using the 2nd unit on another light. Can you help me again, please? Photo attached.
- Copy Link
- Report Inappropriate Content
@B.Will You did it again! I found a white line and hooked it up and it worked. You ROCK! I appreciate your help so much.
- Copy Link
- Report Inappropriate Content
Looks like the red and black are the travelers.
The grey and white are the common/load.
Sounds like you can only replace the playroom because that has the spare white(neutral).
You can use the other 210 on another 3way.
- Copy Link
- Report Inappropriate Content
@B.Will You Are A Genius!! Thank you so much!! That worked like a charm. Thank you for your help. I wouldn’t have figured that out. So for anyone else with issues I suggest posting a phot of the ‘before’ wiring.
@B.Will I am using the 2nd unit on another light. Can you help me again, please? Photo attached.
- Copy Link
- Report Inappropriate Content
Your Welcome, glad to be of help.
On this one the white and red are the travelers.
The black is common/load.
I do not see a white(neutral), is there a neutral in the box?
If not maybe there is one on the other end of the 3way?
- Copy Link
- Report Inappropriate Content
@B.Will You did it again! I found a white line and hooked it up and it worked. You ROCK! I appreciate your help so much.
- Copy Link
- Report Inappropriate Content
Again Your Welcome.
If you could give Thumbs Up, and click on Best Solution in my posts that helped
- Copy Link
- Report Inappropriate Content
@B.Will Added the thumbs up and such. If there is anything else I can do I would be DELIGHTED to help you out after your spot on advice! Thanks again!!!
- Copy Link
- Report Inappropriate Content
Wires are connected wrong seems like: traveler wires and neutral wires come out of the same cable. The line/load wire can be d the same color of one of the travelers.
Plus you need to know which switch is the main line switch.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3689
Replies: 7
Voters 0
No one has voted for it yet.