Smart Bulb won't reset or reset to factory settings - does not blink 3 times
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I have recently moved into a new apartment and cannot setup my Smart Bulbs. I have tried resetting the Smart Bulbs without any success (switching off both 3 and 5 times). Therefore I cannot find and Wi-Fi connect my SMart Bulbs. Any tips or tricks for how to fix this?
Thanks!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Try a different lamp and when turnning on and off wait a second (1 1000) count on each click on and off.
- Copy Link
- Report Inappropriate Content
@Carl This was a suprise to me, but the timing is really tricky.
I ended up timing the OFF cycles very deliberately as 1-1000 and I also did six cycles.
- Copy Link
- Report Inappropriate Content
hi all, I have faced this problem of smart bulb going offline after power outages. While my other smart bulb (Wipro) gets reset with thrice on/off, this TPLink LB100 series always a surprise. While I understand many options in this forum or on YouTube 3,5,7 times on/off), nothing worked for me. I have figured this and want to share
a) Remove bulb
b) Use another bulb socket holder/adaptor or another lamp and try on/of for 3-5 times and it should start blinking.
c) Complete smart bulb setup using Kasa app
d) Plug it back to your original lamp
this should work as it worked for me more than thrice now. Good luck.
- Copy Link
- Report Inappropriate Content
Are you using a lamp with a wall switch to do this?? Or the type of lamp where you have to do the 3x on/off at the lamp with a push-button up by the bulb. Or doesn't it make a difference; just use a different lamp fixture. thanks
- Copy Link
- Report Inappropriate Content
Information
Helpful: 31
Views: 44515
Replies: 4
Voters 1
