Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.11.0.0043
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Powerline firmware for TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) version QCA75XX-2.11.0.0043
This firmware is with 1200Mbit and 1300Mbit adapters compatible of every manufacturer with QCA7500 and QCA7550 chip regardless of hardware version.
Update via tpPLC_Utility for Windows or Mac with PIB file of previous firmware update.
TL-WPA8630(P):
QCA7500-2.11.0043_for_usual_hardware.nvm
https://mega.nz/file/pdVTmSyQ#iKH_4xY9GSZkxLl5HD5g_mxHt80AMREp0Oh4qBZFf7Q
QCA7500-2.11.0043_module_at_position_5_additional_so_with_7_modules_for_new_hardware.nvm Function of this module 5 unknown and not tested but was seen at devices with QCA7550 chip beginning August 2021). Works with TL-WPA8630 V1.
https://mega.nz/file/lAEBXCgS#dmHePU8qzffBicMYQd04hyb13xHrEIh1JdPZjaeTp5I
TL-PA8010(P), TL-PA8030(P), TL-PA8033(P): (hardware revisions with more memory could use as well the not stripped nvm file)
QCA7500-2.11.0043_modules_5-6_stripped_for_usual_hardware.nvm (description of modules 5 and 6 is written in message #113 of this thread)
https://mega.nz/file/UcUx1aYS#Dve_qReXile2jBg-OrBg5YGL5nQ4ppctxyH2atUTAwI
QCA7500-2.11.0043_module_at_position_5_additional_so_with_5_modules_for_new_hardware.nvm without the modules which are named 5 and 6 but here would be 6 and 7 for newer hardware with e.g. more memory. Function of this module 5 unknown and not tested.
https://mega.nz/file/YJkiCCrK#uykjC0_MYmqlA-rHaMuTc6iWEEPvTGsrKA109F-MuJk
Changes to version 2.10.0.0032 are:
Stability increase
IPTV streaming to several adapters improved
Previous:
QCA75XX-2.10.0.0032.nvm
https://mega.nz/file/5cEl2KLA#0rEqjZPwJJIvxkSlubBLGOHkgtqJ81Tlx4LxcXl41qE
QCA75XX-2.10.0.0032_modules_5-6_stripped.nvm
https://mega.nz/file/REcliYJC#iicAohSemkzZNzDljGRDVStwdX-fkzhaCBYO0ytQGnM
TL-WPA8630(P):
QCA75XX-2.8.0.0030.nvm
https://mega.nz/file/NENXSSpb#uNPKc30NMc9E9hM8YiC491exuoo4wFMoc-2_Byuv5fU
TL-PA8010(P), TL-PA8030(P), TL-PA8033(P):
QCA75XX-2.8.0.0030_modules_5-6_stripped.nvm
https://mega.nz/file/MJMngIgD#ZCDdBo5F1T_bIeGQM2tv8qpgz62lno-2oPAXY9K9o6g
Changes to version 2.8.0.0030 are:
Stability increase
Powerline network management improvement
Changes to version 2.7.0.0041 are:
Transfer speed increase
Boot time reduction
Stability increase
This is an official public available firmware.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Great help, I managed to get it to 2.6 by stepping through each update. Still struggling with 2.8. I'll give it another shot tomorrow and make sure I have all the files and versions straight in my head.
- Copy Link
- Report Inappropriate Content
I found a pib for v2 that may work with your device:
https://drivers.plus/fr/tp-link-tl-pa8030p-kit-v2-powerline-firmware-170426/305585/
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@turboleak OpenWRT support on WPA8630P V2 is super exciting, since I expect it would resolve a lot of the shortcomings with the AP functionality.
I'm in the UK - I think the UK version is the same as EU version, except for the UK socket on the passthrough.
There is activity relating to this model (V2) on the OpenWRT forums in the last few days so hopefully something will be forthcoming.
- Copy Link
- Report Inappropriate Content
I just went ahead and created a folder with all the .pib files and firmware files in existence for TPLINK QCA75XX devices, as well as recovery tools and a neat tool to dump the .pib of a device.
This .pib dump tool will allow anyone to create a .pib directly from the device instead of waiting for TPLINK to provide one.
Instructions are also present on the folder.
https://www.dropbox.com/sh/hvl9jx1bj82xpne/AACdnHJIMq1ZD9gkHDlB_ykoa?dl=0
- Copy Link
- Report Inappropriate Content
I updated the dropbox folder with firmware and pib's for the QCA4720 devices ( 500/600mbps devices ).
There is a very recent 1.5 firmware that provides excelent performance.
- Copy Link
- Report Inappropriate Content
Great apprecaite your help. I bricked my 8630 yesterday going from 2.6 to 2.7 but managed to unbrick it today. Probably picked the wrong files when I updated. Will try again with your latest postings.
- Copy Link
- Report Inappropriate Content
I've searched online and I've found versions 2.6.0 and 2.7.0 on the UK tplink site, but there's no trace of 2.8.0 anywhere.
If it's coming out from 'other vendors', can you share mode details on which model/version it has been taken from?
Thanks.
- Copy Link
- Report Inappropriate Content
are these files you found for U.K. version only or also U.S. version available?
- Copy Link
- Report Inappropriate Content
I've used the nvm from file "TL-PA8033P KIT(UK)_V3_200329.zip" (https://www.tp-link.com/uk/support/download/tl-pa8033p-kit/#Firmware) and the pib from "TL-PA8030P KIT(EU)_V3_200117.zip" (https://www.tp-link.com/uk/support/download/tl-pa8030p-kit/#Firmware).
The tool now shows a 2.7.0-44 version and so far it's much more stable than the 2.2.x I had before.
Ciao.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 7
Views: 39272
Replies: 116
Voters 7
