Power used by HS105

Power used by HS105
Power used by HS105
2020-12-17 19:20:15 - last edited 2020-12-18 20:36:46
Model: HS105
Hardware Version: V1
Firmware Version: 1.5.6

How many watts does the HS105 it self use when on?

I have one connected to a UPS and would like to know so I can add it to the run time calculation.

0
0
#1
Options
2 Accepted Solutions
Re:Power used by HS105-Solution
2020-12-18 19:25:23 - last edited 2020-12-18 20:36:46

@B.Will 

 

I was able to find this for the HS103:

 

Typical:0.89W(Relay ON), 0.35W(Relay OFF)
Standby Mode:0.33W

 

I'll see if I can still find the HS105, but that might give some estimate for now.

Recommended Solution
1
1
#2
Options
Re:Power used by HS105-Solution
2021-01-14 00:07:15 - last edited 2021-01-14 00:24:55

@B.Will 

 

I was finally able to get a specific answer regarding the HS105, my apologies for the delay.

 

Here is it:

 

Relay on: 1.35W
Relay off: 0.97W

Recommended Solution
1
1
#4
Options
3 Replies
Re:Power used by HS105-Solution
2020-12-18 19:25:23 - last edited 2020-12-18 20:36:46

@B.Will 

 

I was able to find this for the HS103:

 

Typical:0.89W(Relay ON), 0.35W(Relay OFF)
Standby Mode:0.33W

 

I'll see if I can still find the HS105, but that might give some estimate for now.

Recommended Solution
1
1
#2
Options
Re:Power used by HS105
2020-12-18 20:36:21

@Tony Thanks for the info.

I would think the circuitry in the 105 and 103 to be the same, just that the 105 has a higher rated relay contacts.

0
0
#3
Options
Re:Power used by HS105-Solution
2021-01-14 00:07:15 - last edited 2021-01-14 00:24:55

@B.Will 

 

I was finally able to get a specific answer regarding the HS105, my apologies for the delay.

 

Here is it:

 

Relay on: 1.35W
Relay off: 0.97W

Recommended Solution
1
1
#4
Options
Related Articles