KL130 scheduled turns on at 0 brightness if KL130 was already on.

KL130 scheduled turns on at 0 brightness if KL130 was already on.
KL130 scheduled turns on at 0 brightness if KL130 was already on.
2021-03-18 14:22:51 - last edited 2021-03-18 16:35:33
Model: KL130
Hardware Version:
Firmware Version:

I have 2 KL130 bulbs in use.  They are scheduled to turn on and off once a day.  If I turn on these bulbs ahead of the "scheduled on" time, when the "scheduled on" time hits, the brightness changes to zero.  Happens to both bulbs.  Not a big deal, but annoying ...  Thoughts?

0
0
#1
Options
1 Accepted Solution
Re:KL130 scheduled turns on at 0 brightness if KL130 was already on.-Solution
2021-03-18 16:35:21 - last edited 2021-03-18 16:35:32

@B.Will 

 

I ran a test using an appropriate preset selecting "Use A Preset" instead of "Turn On" and that fixed the issue.  The KL130 that I manually turned on stayed on with the expected brightness as the scheduled on hit.

 

Thank you for steering me in that direction.

Recommended Solution
2
2
#4
Options
4 Reply
Re:KL130 scheduled turns on at 0 brightness if KL130 was already on.
2021-03-18 16:04:18

@Harley75 Check your on schedule is it set with a zero preset?

0
0
#2
Options
Re:KL130 scheduled turns on at 0 brightness if KL130 was already on.
2021-03-18 16:22:02

@B.Will 

 

The schedule is configured to "Turn On", not "Use A Preset".

Works as one would expect if lamps are off. 

I thought the "Default States" were in play for the "scheduled on", using  default state "on from App".  That is the behavoir I experience.

 

I'll change to "Use A Preset" and see if that makes a difference....

0
0
#3
Options
Re:KL130 scheduled turns on at 0 brightness if KL130 was already on.-Solution
2021-03-18 16:35:21 - last edited 2021-03-18 16:35:32

@B.Will 

 

I ran a test using an appropriate preset selecting "Use A Preset" instead of "Turn On" and that fixed the issue.  The KL130 that I manually turned on stayed on with the expected brightness as the scheduled on hit.

 

Thank you for steering me in that direction.

Recommended Solution
2
2
#4
Options
Re:KL130 scheduled turns on at 0 brightness if KL130 was already on.
2021-03-18 16:41:28

@Harley75 Your Welcome.

Glad to hear it's working now.

0
0
#5
Options