c120 camera - Can it signal motion detection via ONVIF
I would like to handle mition detection on the camera using the ONVIF compliant capabilities of the c120. Can the c120 handle motion detection signalling to a 3rd party device such as Agent DVR, a software based DVR?
I am on version 1.1.15 of the firmware. This is the latest version as of this posting.
My reasons for wanting to detect motion on the camera stem from the fact that motion detection within Agent DVR is very CPU intensive. If I can offload this work to the camera, then my Agent DVR server will run on less resources. This will help with the project budget.
BTW... I had to post this as a c110 moel since the form did not list the model c12o in the drop down list. It is a newer model and needs to be added to the list.
Thanks.
Hi, I was able to get this working with the C120 after some fiddling. Instead of selecting a camera model from the list, try adding as an ONVIF source. For the Service URL, use http://ipaddress:2020/onvif/device_service
Here is a screenshot of what worked for me. Then, in your "Detector" settings select "ONVIF". That will read the ONVIF movement detection from the camera instead of being processed by Agent DVR. In the Server Settings for "ONVIF", I was able to turn on "Event Logging" and see the ONVIF messages coming from the camera.
Hi, I was able to get this working with the C120 after some fiddling. Instead of selecting a camera model from the list, try adding as an ONVIF source. For the Service URL, use http://ipaddress:2020/onvif/device_service
Here is a screenshot of what worked for me. Then, in your "Detector" settings select "ONVIF". That will read the ONVIF movement detection from the camera instead of being processed by Agent DVR. In the Server Settings for "ONVIF", I was able to turn on "Event Logging" and see the ONVIF messages coming from the camera.
