Tapo DL110 Calibration Failed
I recently installed the Tapo DL110 and am getting an error when calibrating. I can verify that the lock itself is working and the doorbell and touchpad both work. I have reset multiple times and removed and replaced the battery with no change,
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Do you use the new bolt provided in the package, or the old one? If you're currently using the old one, try to install the new one, see how it works.
Does the lock turn smoothly when you operate it manually with the thumb latch on the door lock? Any noticeable interruption?
- Copy Link
- Report Inappropriate Content
@Wayne-TP I used the new bolt from the package. The old bolt wasn't compatible. The lock turns smoothly (no resistance) and I've tested with both the door closed and open.
- Copy Link
- Report Inappropriate Content
Youdonotexist wrote
@Wayne-TP I used the new bolt from the package. The old bolt wasn't compatible. The lock turns smoothly (no resistance) and I've tested with both the door closed and open.
To help assist and streamline the identification of the behavior, we recommend sending an email to forumsupport.usa@tp-link.com with the following information:
Subject: [Forum Escalation][ID 853750] Tapo DL110 Calibration Failed
Forum Nickname: Youdonotexist
Thread URL: https://community.tp-link.com/us/smart-home/forum/topic/853750
Product Info (Model, Hardware&Firmware Versions, Mac address, etc): [User Provided]
Description: [User Provided]
Any Other Relevant Information (Logs, Config Files, Images, etc.): [User Provided]
Once sent, a ticket will be created in our support system, and a team member will follow up to gather more information or troubleshoot the issue.
- Copy Link
- Report Inappropriate Content
@Wayne-TP hello, I am having the exact same problem and am currently unable to use my lock. Can I get some assistance?
- Copy Link
- Report Inappropriate Content
@SoosFetti I ended up having to return mine to Amazon. I bought it used and I wonder if they keep repackaging these broken locks as "used".
- Copy Link
- Report Inappropriate Content
SoosFetti wrote
@Wayne-TP hello, I am having the exact same problem and am currently unable to use my lock. Can I get some assistance?
Regarding the calibration failure issue on Tapo smart door lock, here are some troubleshooting suggestions:
1. If you’re still using the original lock bolt, please replace it with the bolt included with the product, then try running the device again.
2. If the new bolt is already installed, make sure you can lock/unlock the door smoothly by hand. If not, dissemble the lock and reinstall it, making sure the tailpiece is mounted vertically, not tilted.
3. If the lock can be manually locked and unlocked smoothly but calibration still fails, please verify the calibration results separately with the door open and with the door closed.
a. If it calibrates when open but fails when closed, this indicates that the door frame depth is less than the length of the lock bolt when fully extended. Use the included Strike Box to adjust the frame depth for proper fit.
b. If calibration fails in both positions, this isn’t typical. In this case, please reach out to our support team for further assistance.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 325
Replies: 6
Voters 0
No one has voted for it yet.