How to install H200 with power into light

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to install H200 with power into light

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to install H200 with power into light
How to install H200 with power into light
2017-07-04 06:38:40
Model : HS200

Hardware Version :

Firmware Version :

ISP : Spectrum

Can someone explain how to install HS200 when the power goes into the light, like shown below





In another word, I have only three wires to connect, instead of four as the installation guide assumes.

Thanks!
  0      
  0      
#1
Options
1 Reply
Re:How to install H200 with power into light
2017-07-04 21:37:34
You cannot do it safely, neutral is required. If you have one available, power in comes from the white/black stripe and is switched by the HS200 out through the black. The HS200 white needs to be connected to the neutral.
  0  
  0  
#2
Options