Port Forwarding

Please follow the steps below for troubleshooting port forwarding failures on a TP-Link router.

Step 1:  Make sure the server is accessible from the internal network

You will want to double-check the IP address and the port number of the server.  Check if you can access that server in the local network.  If you are unable to access the server in your local network, please check the settings of your server.

Step 2:  Check the port forwarding settings in the router.

For DSL Modem Router: https://www.tp-link.com/en/support/faq/1216/

For Wireless Router: https://www.tp-link.com/en/support/faq/2799/

For 4G LTE Router: https://www.tp-link.com/en/support/faq/1685/

For Deco: https://www.tp-link.com/en/support/faq/1797/

Step 3:  Pay attention to the WAN IP address in the status page

If there are still problems, please check the WAN IP of the router.  Verify the router is getting a public IP address.  If it is a private IP address, which means it's not enough to only open port on the TP-Link, you have to do the same setting on the modem router as well. 

What's the WAN IP address? Here is the instruction.

For DSL Modem Router:

New designed blue UI:

New logo:

New UI:

For Wireless Router:

Green UI:

New designed blue UI:

New UI:

Gaming UI:

 

For 4G LTE Router:

New logo:

New UI:

Note:

WAN IP should be a public IP address. The WAN IP is assigned dynamically by ISP. If the WAN IP address of the router is not a public IP address, but a private IP address, that means there is another NAT device connected to the WAN port of the router. You need to open the service ports on that device as well. 

For most of the 4G LTE router, the internet service provider usually gives the private IP Address. So, if you want to do the port forwarding, please contact your internet service provider to assign you a public IP address or do the port forwarding in their part.