Maintaining Your Robot Vacuum's Different Parts and Accessories
Maintaining and Extending the Life of Your Robot Vacuum
To keep your vacuum at its maximum performance, it is necessary to maintain the vacuum on a regular basis. Below you can find the recommended/approximate frequency for cleaning each part of the vacuum:
| Part | Maitenance Frequency | Replacement Frequency |
|---|---|---|
| Dustbin | Clean/Wash as Needed | - |
| Filter | Once a Week | 3-6 Months |
| Main Brush | Every 2 Weeks | 6-12 Months |
| Main Brush Cover | Every 2 Weeks | 6-12 Months |
| Side Brush | Monthly | 3-6 Months |
| Dust Bag | - | Replace When Full |
| Mop Cloth | After Each Use | 2-3 Months |
| Caster Wheel | Clean as Needed |
- |
| Main Wheel | Monthly | - |
| Sensors | Monthly | - |
| Charging Contacts | Monthly | - |
In App Notifications and Timers
The Tapo App will remind you to occasionally perform maintenance or if a problem is detected. The Main Brush, Side Brush, and HEPA Filters have in-app timers to help you track when a part should be replaced.
Recommended Maintenance for Each Part
Charging Contacts (Clean Monthly) 
- Dust and debris buildup on the charging contacts can disrupt charging; clean with dry cloth every month or when visible dust appears.
Dust Bag (Replace When Full)
- Dust bags automatically seal when removed, preventing exposure to dust.
- Replace the dust bag with a new one when full; do not empty and reuse.
HEPA Filter (Once a Week, Replace After 3-6 Months)
- Wash the HEPA filter thoroughly every two weeks and allow it to fully dry in sunlight before reusing.
- Replace the filter every 200 hours of use or as needed to maintain optimal filtration efficiency.
Main Brush (Clean Every 2 Weeks, Replace After 6-12 Months)
- Regularly remove debris or hair tangled around the brush using the included cleaning tool in the autoempty dock.
- Replace the main brush approximately every 400 hours or sooner if worn.
Main Brush Cover (Clean Every 2 Weeks)
- The cover prevents debris from tangling the main brush.
- Periodically clean its surface and clips, and replace the brush cover if it becomes worn out or damaged.
Mop Cloth (Clean After Use Each Use, Replace After 2-3 Months)
- Wash and dry the mop cloth thoroughly after each cleaning session.
- Replace the cloth every 23 months, or sooner if it shows significant staining or wear.
Sensors (Clean Monthly or When Dust is Visible)
- Dust accumulated on the sensors may impact your vacuums pathing efficiency, wipe the sensors clean with a dry cloth every month, or when dust is visible.
- Sensors are located on both the front of the vacuum and the drop (stair) sensors are located on the bottom of the vacuum.
Side Brush (Clean Monthly, Replace After 3-6 Months)
- Replace the side brush every 36 months, or earlier if it appears worn or damaged.
Related Official FAQs