@Nismos14 

The switch would not be able to controld both appliances. You will need to have two seperate smart stiches.

I would want them both on at the same time. Don’t want to control them separately.

As long as the combined current of the two devices are less than the switch ratinig, you should be fine.  Both will go on and off together, and you won't have seperate control.  Find the load wires on your existing "dumb" switches, and wire them together to one of the black wires on the HS200.  Connect the line from the old switches to the other black wire.  (Likely the line will be connected with a pigtale from one of the old swiches to the other--or will come from the same wire nut 'bundle".  Of course, you'll need to connect a white (neutral) wire to the HS200.  Should work fine.  (Note, I'm not an electrician, but am an electrical engineer and reasonably current on residential electrical 'stuff').

Thanks a lot!

You're welcome--let me know if you have any other questions!