HS 210 wiring diagram
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Does anyone have a wiring diagram for the HS210? We did a remodel and installed all new TP Link smart switches. We added 3 way switches for one set of lights and have not been able to get them to work. I have contacted tech support and painfully she asked me a few questions that were hard to understand, but she stated my switches are fine and that it is a wiring issue. I am not able to find a wiring diagram or anything that states where I should have power. One of the switches flashes WiFi all the time after I have connected it to my app. The other will only flash WiFi sometimes.
One the first switch I have power at both carriers and no where else. The second switch I have power on both carriers and the load wire. If I push either switch it doesnt change where I have power. If I take a jumper wire on switch one and jump from a carrier to the load wire the lights come on. I would assume by pushing the switch it should change having power either on or off.
Any information on this would be greatly appreciated!
Below is a really bad drawing of my wiring, but I have verified it for the 100th time. I am convinced I have a bad switch, but cant find anywhere to get readings for a working switch. More wiring color is to represent the different wiring not the actual color. Where I have drawn the stars I am getting 110 volts. The load wire on the one switch is at 0 volts and does not change when I press and release either switch. If I jump from the Traveler wires the lights come on, but nothing happens if I press either switch. I am not able to get different voltage readings at either switch. I have called and talked to the tech support team and they have me answer a few questions and then tell me its a wiring problem. Any suggestions???
