Schedule On/Off KL 120 Bulb

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Schedule On/Off KL 120 Bulb

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Schedule On/Off KL 120 Bulb
Schedule On/Off KL 120 Bulb
2020-06-04 18:38:59 - last edited 2020-06-05 12:46:22
Model: KL120  
Hardware Version: V1
Firmware Version:

Somewhere there must be a tutorial on how to set up an on / off schedule for this bulb?  I can't find it. Can someone point to the basics, please?

And, by the way, the Support page never, ever loads.

Thanks

Alexander

  0      
  0      
#1
Options
2 Accepted Solutions
Re:Schedule On/Off KL 120 Bulb-Solution
2020-06-04 22:52:55 - last edited 2020-06-05 12:46:25

@Alexander940 

 

UI is the previous but the steps are the exact same.

 

1. On the Kasa app, tap “LB130”, then click on “Schedule”.

 

2. Tap “+” button to add a new schedule.

 

3. You could create the event from aspects of bulb status, point in time and week day.

Note: There are three patterns including Circadian, Last “ON” Status and Off. You could also select four preset status which varies in color and brightness or select the current settings.

 

4. You can change the Presets refer to this link if needed.

 

5.  You have a central management about schedule and if the schedule command hasn't been executed yet, you can see the schedule command in the “Devices” page.

Recommended Solution
  0  
  0  
#2
Options
Re:Schedule On/Off KL 120 Bulb-Solution
2020-06-05 12:46:16 - last edited 2020-06-05 12:46:22
Thank you very much!!!!
Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:Schedule On/Off KL 120 Bulb-Solution
2020-06-04 22:52:55 - last edited 2020-06-05 12:46:25

@Alexander940 

 

UI is the previous but the steps are the exact same.

 

1. On the Kasa app, tap “LB130”, then click on “Schedule”.

 

2. Tap “+” button to add a new schedule.

 

3. You could create the event from aspects of bulb status, point in time and week day.

Note: There are three patterns including Circadian, Last “ON” Status and Off. You could also select four preset status which varies in color and brightness or select the current settings.

 

4. You can change the Presets refer to this link if needed.

 

5.  You have a central management about schedule and if the schedule command hasn't been executed yet, you can see the schedule command in the “Devices” page.

Recommended Solution
  0  
  0  
#2
Options
Re:Schedule On/Off KL 120 Bulb-Solution
2020-06-05 12:46:16 - last edited 2020-06-05 12:46:22
Thank you very much!!!!
Recommended Solution
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1046

Replies: 2

Related Articles