Installing HS220P3 dimmer

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Installing HS220P3 dimmer

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Installing HS220P3 dimmer
Installing HS220P3 dimmer
2021-01-01 16:21:05 - last edited 2021-01-01 16:26:31

Hi All,

 

Trying to install HS220P3 dimmer switch. Found the neutral and ground but could not figure out the line and load wire. Ground wire (green) comes out of the old dimmer and is connected with the ground (copper) in the panel. Then 2 black wires come out and are connected to 2 different wires in the panel.

 

 

Used the non-contact voltage tester to detect but both the wires emit the sensitivity.


Need expert help to figure out the line vs load wire in this setup.

 

Thank you,

Sharad

 

 

 

  0      
  0      
#1
Options
1 Reply
Re:Installing HS220P3 dimmer
2021-01-01 18:58:34

@usbhero remove the switch and put the wirenut back on the wire coming from the box.

Turn the breaker back on and test again with the non-contact tester.

 

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 591

Replies: 1

Related Articles