New Arrival: S200D Smart Remote Dimmer Switch

Making Your Smart Home Accessible to Guests (Sub-GHz Hub Required)

• Smart Actions – Control and set multiple lights, electronics, and other Tapo smart devices with the button.
• Customized Actions – Single tap, double tap, and rotating options enable you to trigger multiple smart actions, from just one button.
• Control From Multiple Locations – Control electrical fixtures from multiple locations with Tapo smart buttons.
• Long Battery Life – The battery will last more than one year.
• Personalized Location Stickers – Allowing Even Your Guests to Control Your Smart Home

Buy the S200D on Amazon Now!

 

 

Please Note: The S200D is a Sub-GHz Device and Requires a Sub-GHz Compatible Hub from Tapo. Currently, the H100 and H200(Sold as a Bundle with Sub-GHz Cameras) are Available. Sub-GHz Devices, such as Sensors and Buttons, connect over a Sub-1GHz Frequency, and will not connect with a traditional Wi-Fi connection.

Read More About Sub-GHz in our Story Article: Connecting Your Home with Sub-GHz

 

Available Smart Action Triggers for the S200D

For Everyone's Information, the Available Triggers for the S200D can be seen in the screenshot below. Each of these triggers may be set to control your Tapo Devices or can be assigned to trigger a separate scene or Smart Action. 

Tip: For the Rotate Clockwise and Counter Clockwise Actions, we recommend using a light so that you may take advantage of the 'Dim Brightness by' Action

Our Team cannot wait to see how everyone uses the new buttons and smart actions to control your Smart Home!

 

 

Configuring Your Smart Button to Change the Brightness of Your Lights:

 

Control Two Lights Separately with Smart Actions

By Enabling and Disabling Smart Actions, it is possible to “assign” a device to be controlled by the Dimmer Button depending on if the button was last pressed once or twice. The base outline of the Smart Actions is provided below. However, additional commands to turn on lights or set effects may also be added to the Smart Actions.

 

Smart Action for Light Controls of Light 'A' and Light 'B':

• Rotate Clockwise and Counter Clockwise: Change Brightness of Light 'A' +/- 5% (2 Separate Smart Actions)
• Rotate Clockwise and Counter Clockwise: Change Brightness of Light 'B' +/- 5% (2 Separate Smart Actions)

 

Smart Actions for Light/Mode Switching at Button:

Activate Controls for Light A on Button Press:

Trigger:

• When S200D Button is Pressed

Actions:

• Disable Rotation Smart Actions for Light B (2 Actions)

• Enable Rotation Smart Actions for Light A (2 Actions)

 

Activate Controls for Light B on Button Double Press:

Trigger:

• When S200D Button is Pressed Twice

Actions:

• Disable Rotation Smart Actions for Light A (2 Actions)
• Enable Rotation Smart Actions for Light B (2 Actions)