Hi,

My kitchen lights are controlled by a single switch. When I removed my old manual switch, it had 2 black wires under one screw and one black wire under another screw. There is an outlet in the same box so I'm assuming it's to get power to the outlet. There is a bundle of neutral wires and a ground wire. I marked the two wires which were on the same screw in the old switch and connected those to one of the black wires on the 200. Connected the single black wire that was on the other screw on the old switch to the other black wire on the 200. Connected the neutral and ground. Light will not come on either by manually turning it on or using the app. Can someone please help.