Smart Home CommunityAll ThreadsTapo D225 & Home Assistant - Not Working
All Threads

Tapo D225 & Home Assistant - Not Working

Tapo D225 & Home Assistant - Not Working

Tapo D225 & Home Assistant - Not Working
Tapo D225 & Home Assistant - Not Working
a week ago - last edited a week ago
Model: Tapo D225  
Hardware Version: V1
Firmware Version: 1.2.2

I have tried, without luck, to set up my Tapo D225 on Home Assistant.  I'm running the Home Assistant web UI via a new Truenas server.  Home Assistant appears to accept the IP address for the D225, but the authentication fails every time.  I have set up a "camera" user account and password on the Tapo app that I am using for the authentication.  I have also turned on "Third-Party Compatibility" in the Tapo app.  Lastly, I turned off 2FA in the Tapo app, but still no love.

 

Is there something I am still missing?  Or is the D225 not truly compatible with Home Assistant directly?  I really would like to stick with Tapo devices and also add one or two more security cameras, but I am starting to think I just need to change out to something like Reolink.

  0      
0
#1
Options
5 Reply
Re:Tapo D225 & Home Assistant - Not Working
a week ago

  @stash64 

 

Home Assistant is indeed a third-party platform that Tapo does not support.

 

If you’re connecting via RTSP/ONVIF: You can check this setup guide to see if a step was missed: How to View Tapo Camera on PC, NAS, or NVR Using RTSP/ONVIF
 

However, if you are using a different connection method and still cannot establish a link even after enabling the “Third-Party Compatibility” switch in the Tapo app, I recommend seeking assistance on the Home Assistant forum.

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
  0  
0
#2
Options
Re:Tapo D225 & Home Assistant - Not Working
18 hours ago

  @stash64 I'm having the exact same issue. Please post if you figure it out and I'll try to remember to do the same.

  0  
0
#3
Options
Re:Tapo D225 & Home Assistant - Not Working
18 hours ago

  @stash64 This always happens. If I ever post a problem to a forum, even if I've been working on it for days, I find the answer just minutes after posting. This time was no different.

 

https://github.com/maxplante/homeassistant-tapo-control

 

It can be added through HACS directly in Home Assistant.

 

I just did it and it works perfectly (except that there is no distortion correction).

  0  
0
#4
Options
Re:Tapo D225 & Home Assistant - Not Working
17 hours ago

  @rustbuckett 

rustbuckett wrote

  @stash64 This always happens. If I ever post a problem to a forum, even if I've been working on it for days, I find the answer just minutes after posting. This time was no different.

 

https://github.com/maxplante/homeassistant-tapo-control

 

It can be added through HACS directly in Home Assistant.

 

I just did it and it works perfectly (except that there is no distortion correction).

 

I did the same as well.  It would seem the HACS integration is the only way to get the Tapo devices to work on Home Assistant.  And it was a real challenge to get HACS installed because I am using the Web UI app only version of Home Assistant, running on TrueNAS, not the OS version.

  0  
0
#5
Options
Re:Tapo D225 & Home Assistant - Not Working
14 hours ago
I'm running HA in a Docker container on a Linux box, so I have a similar setup. I also got my Tapo RV30 connected via custom repo through HACS.
  0  
0
#6
Options

Information

Helpful: 0

Views: 172

Replies: 5