Switches
TP-Link Business Switches are comprised of JetStream series and LiteWave series, which are designed to offer reliable and professional choices to businesses of all sizes. Anything related to TP-Link's JetStream or LiteWave Switches, welcome to ask questions, join discussions and share your experience/ knowledge here.
Switches
Hi All, My switch suddently stopped working which was powering a PoE camera (just one), with only one other cable going to the router. I rebooting everything, reset the switch, and reduced it down to
0Helpful
368Views
hi dear guys ; we have a big issue with 2 types hardware version switch of T2500-10TS. we had been bought 2 type hrrdware version 1.0 & 2.0 as one model switch is T2500-10TS. following details of swit
By
amiraghdam
· Latest post 2020-08-14 04:15:27
by Fae
0Helpful
507Views
We have two switches TL-SG1016PE both V1 rev., with the latest firmware version 1.0.1 Build 20190118 Rel.32996. All ports are enabled. They both have a link problem even after hard reset. If i connect
3Helpful
683Views
Hello, I have pfsense firewall. and I configure 4 VLANs on it. As mentioned below. Also, I have purchased TP-Link T1600G-28PS managed switch. ================= VLAN10 >> 10.10.10.0 VLAN 20 >> 10.10.20
1Helpful
1501Views
0Helpful
189Views
Hi everyone! I'm using TL SG1005P POE switch for EAP110 INDOOR, EAP225-OUTDOOR and OC200. The eap110 just arrived today and after I plug it in on the 1st port it does not power the EAP110. But both EA
0Helpful
1978Views
I just purchased a T2600G-18TS and I'm pretty new to configuring switches still. I see tp-link removed switch port mode trunk. I did search the forums, but I'm still confused on what I read. Only thin
2Helpful
807Views
Hi, Have enable the snmp v1/v2 and create a public comunity. Using the Paessler snmp tester, i do not get the data => no reply from device from all MIB object ID's !!!! With the Paessler tester i can
1Helpful
814Views
I was looking to buy a product like the TL-R600VPN or the TL-SG1005P and was wondering if it would work for my needs. How I would have the switch set up is my router from my ISP (either in router or m
0Helpful
413Views
Hello, I have had the above POE switch for about 3 years now, mostly in continuous use to power some CCTV cameras. Recently, it was connected to power but nothing else whilst I was doing some maintain
1Helpful
1140Views