Smart switch installed
![](/avatar/default.png)
Installed smart switch but continues to trip ground fault. Can switch be installed with a neutral that used on a ground fault?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hey mate,
What's the model number for your switch, is it HS200?
Netural should always connect to netural wire.
- Copy Link
- Report Inappropriate Content
Hs200@Anton L.Z.
- Copy Link
- Report Inappropriate Content
@Makabo.53 by code, you need to connect a white wire to bunch of connected white wire with no current on them. 2 black wires should be connected to 2 black in walls, which should be line and load. It looks like in your case Line/Load and neutral wires are switched. Use tester or call electrician.
- Copy Link
- Report Inappropriate Content
@Yokushka The original post was from 2018. By now, they have probably found an answer (or burned down the house by connecting the neutral to ground and bypassing the breaker).
- Copy Link
- Report Inappropriate Content
@Light_Light When I did my installation, I had the same question, so maybe somebody else will need this answer this days.
Best wishes.
- Copy Link
- Report Inappropriate Content
![](/avatar/default.png)
Information
Helpful: 0
Views: 1032
Replies: 5
Voters 0
No one has voted for it yet.