I am getting frequent disconnections between two (of three) TAPO cameras (one a C100, the other a C310) and my Synology NAS running surveillance Station. Both cameras seem to indicate a good wifi signal and other devices connected to the same wifi do not seem to exhibit an disconnects. The two cameras concerned disconnect at different times of the day, a couple of times a day and generally for less than a minute. Given the amount of time they typically disconnect for it does not seem they are going through a re-boot/power cycle and I suspect it is simply a wifi drop out for some inexplicable reason.
I am trying to get to the bottom of the issue and want to enable the diagnostics on the cameras; both have an SD card installed. What I cannot fathom is how I access the diagnostics that are recorded to the SD card and what form they take; there does not seem to be any means of examining any log files/diagnostics via the App. Do I have to remove the SD card from the camera and look at the diagnostics on a PC?