New firmware ER605 1.1.0 build 20210512
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.New firmware ER605 1.1.0 build 20210512
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Just installed the new firmware for ER605. Although didn't find a changelog.
Details:
- version 1.1.0
- build 20210512
- release 47886
@Fae any changelog you can share?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
TheMuk wrote
I can also confirm the exact behaviour on the ER-7206. I also had to revert again. All my nasses, servers etc are not reachabele anymore internally over the FQDN with public IP... not funny.
Do you mean that the NAT Loopback stops working after you upgrade the ER605/ER7206 firmware to 1.1.0, while reverting it back to 1.0.1 can solve the issue?
Edit:
The NAT Loopback issue has been reported to the R&D team who will make a beta firmware to fix the issue with high priority.
I'll update the following post as soon as possible once the beta firmware is available.
NAT Loopback (Hairpinning) broken in Firmware 1.10 ER7206 and 605 URGENT FIX NEEDED!
Update on June 1, 2021: Here is the beta firmware to fix the NAT Loopback issue:
ER605: ER605(UN)_V1_1.1.0_20210531(Beta)
ER7206: ER7206(UN)_V1_1.1.0_20210531(Beta)
Update on August 10, 2021:
The issue has been resolved on the new firmware 1.1.1, please visit the official website for an upgrade, or follow the post below:
[New Firmware] The firmware v1.1.1 has been released for both ER605 and ER7206 by August 9, 2021
*Any further questions/feedback on the new firmware above, please feel free to click Start a New Thread from HERE.
Thank you for your attention!
- Copy Link
- Report Inappropriate Content
At least of the new features is the option to do some tuning with the firewall.
- Copy Link
- Report Inappropriate Content
Nat loopback (hairpinning) was working before the update. After this update not anymore.
Is there some setting to enable this in the new firmware.
- Copy Link
- Report Inappropriate Content
@PeterHor quickly checked it after your reply. Indeed it's not working... at least for TCP.
I use mosh (c mosh.org) for secure roaming connections to my Linux server.
Initiating a new sessions goes over TCP (ssh TCP/22), once in place it uses UDP (UDP 60000-65000).
creation of a new session fails (using TCP) from the LAN, while reconnecting to an existing session (UDP) works fine.
So far I haven't found a setting to "fix" it.
@Fae - any input?
- Copy Link
- Report Inappropriate Content
updated to 1.1.0 and started to be unable to see my Minecraft server which O have on my network and connecting to a domain which points to my IP.
was unable to figure out what to change.
had to move back to 1.0.1
- Copy Link
- Report Inappropriate Content
I can also confirm the exact behaviour on the ER-7206. I also had to revert again. All my nasses, servers etc are not reachabele anymore internally over the FQDN with public IP... not funny.
- Copy Link
- Report Inappropriate Content
I just noticed the same with Home Assistant and loopback not working. Looks like a firmware rollback is in my near future.
- Copy Link
- Report Inappropriate Content
Dear @paderijk,
paderijk wrote
Just installed the new firmware for ER605. Although didn't find a changelog.
Details:
- version 1.1.0
- build 20210512
- release 47886
@Fae any changelog you can share?
Check this firmware link, https://www.tp-link.com/en/support/download/er605/#Firmware
- Copy Link
- Report Inappropriate Content
TheMuk wrote
I can also confirm the exact behaviour on the ER-7206. I also had to revert again. All my nasses, servers etc are not reachabele anymore internally over the FQDN with public IP... not funny.
Do you mean that the NAT Loopback stops working after you upgrade the ER605/ER7206 firmware to 1.1.0, while reverting it back to 1.0.1 can solve the issue?
Edit:
The NAT Loopback issue has been reported to the R&D team who will make a beta firmware to fix the issue with high priority.
I'll update the following post as soon as possible once the beta firmware is available.
NAT Loopback (Hairpinning) broken in Firmware 1.10 ER7206 and 605 URGENT FIX NEEDED!
Update on June 1, 2021: Here is the beta firmware to fix the NAT Loopback issue:
ER605: ER605(UN)_V1_1.1.0_20210531(Beta)
ER7206: ER7206(UN)_V1_1.1.0_20210531(Beta)
Update on August 10, 2021:
The issue has been resolved on the new firmware 1.1.1, please visit the official website for an upgrade, or follow the post below:
[New Firmware] The firmware v1.1.1 has been released for both ER605 and ER7206 by August 9, 2021
*Any further questions/feedback on the new firmware above, please feel free to click Start a New Thread from HERE.
Thank you for your attention!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 6280
Replies: 20
Voters 0
No one has voted for it yet.