Forums

Stories

Knowledge Base

Business Community > Routers > ER605: false ip adresses

< Routers

ER605: false ip adresses

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605: false ip adresses

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Zettie

LV1

2022-09-15 16:07:53 - last edited 2022-09-16 07:07:43

Posts: 15

Helpful: 9

Solutions: 1

Stories: 0

Registered: 2022-04-04

ER605: false ip adresses

2022-09-15 16:07:53 - last edited 2022-09-16 07:07:43

Tags: #VLAN & Multi-Networks #DHCP Service

Model: ER605 (TL-R605)

Hardware Version: V1

Firmware Version: 1.2.1

My Er605 is behaving very strange. After a reset or power-off several (sometimes all) wireless devices connect with a false IP address. They should connect in the 192.168.10.x range but instead they connect in the 169.254.x.x.

Is my router going bad? Any others have these problems?

configuration:

1x ER605 v1.0 sw 1.2.1

2x TL-SG2210MP v1.0 sw1.0.5 (also with 1.0.4)

2x EAP615-Wall(EU) v1.0 sw 1.1.0 (also with updated 1.0.0)

controller: sw 5.5.6 (docker)

1 Accepted Solution

Fae

2022-09-16 00:48:20 - last edited 2022-09-16 07:07:43

Posts: 3375

Helpful: 1278

Solutions: 431

Stories: 0

Registered: 2020-06-30

Re:ER605: false ip adresses-Solution

2022-09-16 00:48:20 - last edited 2022-09-16 07:07:43

Dear @Zettie,

Zettie wrote

My Er605 is behaving very strange. After a reset or power-off several (sometimes all) wireless devices connect with a false IP address. They should connect in the 192.168.10.x range but instead they connect in the 169.254.x.x.

It seems to be a DHCP issue, here is a solution post for your case.

ER605 ER7206 v1 - DHCP Server May Fail With 1.2.0 and 1.2.1 Firmware.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*

Recommended Solution

3 Reply

Zettie

LV1

2022-09-15 16:49:30 - last edited 2022-09-15 17:10:26

Posts: 15

Helpful: 9

Solutions: 1

Stories: 0

Registered: 2022-04-04

Re:ER605: false ip adresses

2022-09-15 16:49:30 - last edited 2022-09-15 17:10:26

@Zettie

Was fed up with it and converted back to v1.1.1 on the ER605. Now done 2 reboots and all the times no problems. Something is definately not good in version 1.2.0 and 1.2.1 (and Build 20220512).

Fae

2022-09-16 00:48:20 - last edited 2022-09-16 07:07:43

Posts: 3375

Helpful: 1278

Solutions: 431

Stories: 0

Registered: 2020-06-30

Re:ER605: false ip adresses-Solution

2022-09-16 00:48:20 - last edited 2022-09-16 07:07:43

Dear @Zettie,

Zettie wrote

My Er605 is behaving very strange. After a reset or power-off several (sometimes all) wireless devices connect with a false IP address. They should connect in the 192.168.10.x range but instead they connect in the 169.254.x.x.

It seems to be a DHCP issue, here is a solution post for your case.

ER605 ER7206 v1 - DHCP Server May Fail With 1.2.0 and 1.2.1 Firmware.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*

Information

Helpful: 0

Replies: 3

ER605: false ip adresses

ER605: false ip adresses

Information

Voters 0

Tags