ER605: false ip adresses

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605: false ip adresses

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605: false ip adresses
ER605: false ip adresses
2022-09-15 16:07:53 - last edited 2022-09-16 07:07:43
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.2.1

My Er605 is behaving very strange. After a reset or power-off several (sometimes all) wireless devices connect with a false IP address. They should connect in the 192.168.10.x range but instead they connect in the 169.254.x.x.

Is my router going bad? Any others have these problems?

 

configuration:

1x ER605 v1.0 sw 1.2.1

2x TL-SG2210MP v1.0 sw1.0.5 (also with 1.0.4)

2x EAP615-Wall(EU) v1.0 sw 1.1.0 (also with updated 1.0.0)

controller: sw 5.5.6 (docker)

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:ER605: false ip adresses-Solution
2022-09-16 00:48:20 - last edited 2022-09-16 07:07:43

Dear @Zettie,

 

Zettie wrote

My Er605 is behaving very strange. After a reset or power-off several (sometimes all) wireless devices connect with a false IP address. They should connect in the 192.168.10.x range but instead they connect in the 169.254.x.x.

 

It seems to be a DHCP issue, here is a solution post for your case.

 

ER605 ER7206 v1 - DHCP Server May Fail With 1.2.0 and 1.2.1 Firmware. 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  3  
  3  
#3
Options
3 Reply
Re:ER605: false ip adresses
2022-09-15 16:49:30 - last edited 2022-09-15 17:10:26

  @Zettie 

Was fed up with it and converted back to v1.1.1 on the ER605. Now  done 2 reboots and all the times no problems. Something is definately not good in version 1.2.0 and 1.2.1 (and Build 20220512).

  0  
  0  
#2
Options
Re:ER605: false ip adresses-Solution
2022-09-16 00:48:20 - last edited 2022-09-16 07:07:43

Dear @Zettie,

 

Zettie wrote

My Er605 is behaving very strange. After a reset or power-off several (sometimes all) wireless devices connect with a false IP address. They should connect in the 192.168.10.x range but instead they connect in the 169.254.x.x.

 

It seems to be a DHCP issue, here is a solution post for your case.

 

ER605 ER7206 v1 - DHCP Server May Fail With 1.2.0 and 1.2.1 Firmware. 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  3  
  3  
#3
Options
Re:ER605: false ip adresses
2022-09-16 07:00:40

  @Fae Hi Fae, correct the new version works ok, thank you!

  2  
  2  
#4
Options