EAP650/EAP655-Wall | EAP650 | EAP670 | EAP653 May Drop Some IPv6 Packets. [Updated on Aug 4th 2023]

EAP650/EAP655-Wall | EAP650 | EAP670 | EAP653 May Drop Some IPv6 Packets. [Updated on Aug 4th 2023]

41 Reply
Re:EAP650/EAP655-Wall | EAP650 | EAP670 | EAP653 May Drop Some IPv6 Packets. [Updated on Apr 18th 2023]
2023-04-18 09:07:31 - last edited 2023-05-19 03:47:34

Update as of Apr 18th 2023:

 

Update the Beta firmware for EAP653 V1, which has fully fixed the IPv6 related issue described in this thread.

Please check out this initial solution post for downloading!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#22
Options
Re:EAP650/EAP655-Wall | EAP650 | EAP670 | EAP653 May Drop Some IPv6 Packets. [Updated on Apr 18th 2023]
2023-04-21 19:00:04

Hello @Fae 

 

Any ETA on the fully fixed IPv6 firmware for the EAP650, just like the one released for the EAP653? Beta or otherwise.

 

Thank you

  0  
  0  
#23
Options
Re:EAP650/EAP655-Wall | EAP650 | EAP670 | EAP653 May Drop Some IPv6 Packets. [Updated on Apr 18th 2023]
2023-05-04 17:41:21

  @Fae 

 

Feedback from my side: First impression, looks good! IPv6 is now usable at my network/wifi.

  0  
  0  
#24
Options
Re:EAP650/EAP655-Wall | EAP650 | EAP670 | EAP653 May Drop Some IPv6 Packets. [Updated on Apr 18th 2023]
2023-05-05 01:25:37

Hello @s0x,

 

Have you already installed the following updated Beta firmware for your EAP650-Wall?

If the issue still persists with the new 1.0.3 Build 20230410 Beta firmware, please feel free to let me know.

 

Fae wrote

Update as of Apr 12th 2023:

 

Add the Beta firmware for EAP650-Wall, which has fixed the IPv6 related issue described in this thread.

EAP650-Wall(EU&US)_v1_1.0.3_Build 20230410 (Beta)

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#25
Options
Re:EAP650/EAP655-Wall | EAP650 | EAP670 | EAP653 May Drop Some IPv6 Packets. [Updated on Apr 18th 2023]
2023-05-05 13:11:12

Hi  @Fae 

 

I don't have EAP650-Wall, but 2 EAP650.

 

Due to the reboot and WiFi channel issue I'm running the 1.0.6 beta. Is the IPv6 issue fully fixed on this one? Or is version 1.1.0 (similar to EAP653) going to be released to address it?

 

I noticed that
EAP650(EU&US)_v1_1.0.0_Build 20221116 (Beta)

is now stricken through on this thread.

 

  0  
  0  
#26
Options
Re:EAP650/EAP655-Wall | EAP650 | EAP670 | EAP653 May Drop Some IPv6 Packets. [Updated on Apr 18th 2023]
2023-05-08 03:08:46

Hello @s0x 

 

Sorry for my mistake to take the EAP650 as the EAP650-Wall, too many Beta firmware provided in this thread.

 

The 1.0.6 Beta and 1.0.0 beta for EAP650 are independent. I don't think the EAP650 1.0.6 beta has fixed the IPv6 issue as the 1.0.0 beta does. Besides, the EAP650 1.1.0 Beta should only fix the IPv6 issue.

 

Are your EAP650s suffering from both the IPv6 issue and the disconnected issue caused by weather radar channels? I haven't been informed of any newer beta firmware for the EAP650 yet, if you need further assistance with your EAP650, please feel free to let me know.

 

BTW, the EAP650(EU&US)_v1_1.0.0_Build 20221116 (Beta) link was just recovered.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#27
Options
Re:EAP650/EAP655-Wall | EAP650 | EAP670 | EAP653 May Drop Some IPv6 Packets. [Updated on Apr 18th 2023]
2023-05-08 23:44:20

Hi  @Fae

 

No problem.

 

Yes, they're suffering from both issues, and being the readopt loop after reboot the most critical one, that's the beta firmware I'm running in them.

 

I've tried IPv6 on the beta firmware for the readopt loop (1.0.6), and I get a IPv6 IP, afterwards I get no traffic when trying to use that IPv6 network. It's a network on a VLAN as well.

 

A constructive criticism I might have is, it would be more (pro-)(con-)sumer friendly to have beta firmwares follow some path, so that ones released later contain all the previous fixes for other issues.

 

So, now, official released firmware (non Beta), has both issues present. Then one with fix for one issue, and a separate one for another issue (IPv6) on an older code base than both the readopt loop fix beta firmware and currently released firmware. It's an unfortunate situation.

 

The devices affected seem to be based on the same chipset/SDK?

 

Thank you @Fae for your time. Let me know if more info is needed from my side.

  1  
  1  
#28
Options
Re:EAP650/EAP655-Wall | EAP650 | EAP670 | EAP653 May Drop Some IPv6 Packets. [Updated on May 19th 2023]
2023-05-19 03:48:48 - last edited 2023-08-04 01:00:32

Update as of May 19th 2023:

 

Add the Beta firmware for EAP690E HD v1, which has fixed the IPv6 related issue described in this thread.

Please check out this initial solution post for downloading!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#29
Options
Re:EAP650/EAP655-Wall | EAP650 | EAP670 | EAP653 May Drop Some IPv6 Packets. [Updated on May 19th 2023]
2023-05-22 09:22:24

  @Fae I have an EAP650 with the beta version running (1.0.0 Build 20221116 Rel. 42946). I see VLAN leaking at least of IPv6 NDP packets. Several devices on VLAN 30 are getting IPv6 addresses with the prefix from VLAN 20 and connections timeout because devices use the wrong address. It's just a mess :(

  0  
  0  
#30
Options
Re:EAP650/EAP655-Wall | EAP650 | EAP670 | EAP653 May Drop Some IPv6 Packets. [Updated on May 19th 2023]
2023-05-22 10:06:08

Hello @CuBiC

 

Thank you so much for taking the time to post the issue on TP-Link community!

 

To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID230535869, please check your email box and ensure the support email is well received. Thanks!

Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.

 

Many thanks for your great cooperation and patience!

  0  
  0  
#31
Options