@weewillywinky 

 

tell us a little more about your VPN setup, do you have OpenVPN SSL VPN and IPsec (site to site or L2TP VPN)

I have found that OpenVPN and SSL VPN do not work so I have to use my old ER605v2 router for OpenVPN,

Contacted support but it's like trying to get help from a rock so I've given up.

you can get it to work partially if you use TCP instead of UDP in OpenVPN, but it's very very slow. SSL doesn't have any option to use UDP so it won't work.

 

according to TP-Link, OpenVPN or SSL VPN does not seem to work together with IPSec VPN, they recommended TCP on OpenVPN, my problem was that all IPsec was destroyed if I configured OpenVPN or SSL VPN

 

IPsec VPN works pretty well for when deleting OpenVPN and SSL VPN ,

 

I tried openvpn client to site but that does nothing as far as i can see, also the option for only setting that vpn for select ip's rather than the whole lan seems to be missing too. Used controller 5.7.4 then moved to 5.8 but no difference i assume it needs firmware updates but concerned that will take too long. I've not had a chance to try ipsec but i'm not getting filled with confidence here lol. I was hoping we would be leaving the poor support and lacking features behind with unifi.

 

I just tried Openvpn Client tcp over 443 and nothing from that either.

  @weewillywinky 

 

Ok, so you want to use ER8411 as OpenVPN Client? You use TCP and port 443 in the remote end?

 

that should work I guess, the problem is UDP according to TP-Link.

 

is there a Omada device in the remote end or is it a OpenVPN server?

 

 

Yes correct although it does not work regardless of whether i use tcp 443 or udp 1194. Other end is is openvpn server currently, tried with another (remote) omada device and vpn provider too. I am amazed they would release this in the current state to be honest.

  @weewillywinky 

 

yes, I agree with you, but it has always been like that with the tp-link routers, there is always one thing or another. but we'll see when there's an update soon, I hope they do a little extra with this, which is supposed to be a high-end product. but as it is now it doesn't look so good.

 

You should contact support and make them aware of the problem.

 

 

 

 

 

I have opened a ticket with businness support so will see if i get any answers !

Hi, no not really i did have a response but all i was told was that it will be added in a future firmware with no ETA at all. TP-Link seems to be dropping the ball with the omada product line, you can't advertise as business routers then release with features missing completely and full of bugs that is just sloppy !

  @Fae 

 

Yes i am on the latest firmware which was barely worth releasing don't you think ? I don't know what your development department is doing but you are destroying any potential omada has completely.

I can not recommend your products to any of our customers currently and am myself ready to ditch the lot and go elsewhere.

 

TKID230134134