ER605 V2 2.1.2 Build 20230210 Rel.62992/ Regular Reboot

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 V2 2.1.2 Build 20230210 Rel.62992/ Regular Reboot

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 V2 2.1.2 Build 20230210 Rel.62992/ Regular Reboot
ER605 V2 2.1.2 Build 20230210 Rel.62992/ Regular Reboot
2023-05-01 08:31:49 - last edited 2023-05-26 06:40:16
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.2 Build 20230210 Rel.62992

ER605 V2 Random rebooting.

 

I kept on having problems with intermediate reboot of the ER605 router. After some investigation it seems to me it was not random.

 

The "Intermediate reboot"  seems to me goes together with

1) Services ->  Reboot schedule.

2) Reboot Schedule goes together with the System tool -> time setting

3) Time setting goes together with NPC server or PC time.

 

If there is for one or the other reason after reboot  no correct new time set for the router, the ER605 will go to a default time setting -> for my system it is 01/01/2018 00:00 ( and counting)

When your ER605  is set for a daily reboot at 1:00 in the night. Your system will reboot  1hour + few minutes (reboot) and it will keep on doing this every time because your internal clock is reset to 01/01/2018 00:00 and 1hour + few minutes (reboot) it starts again.

 

 

Anybody has simular experience?

 

Kind regards,

 

 

 

 

 

 

 

 

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:ER605 V2 2.1.2 Build 20230210 Rel.62992/ Regular Reboot -Solution
2023-05-05 08:59:10 - last edited 2023-05-26 06:40:16

Hello @BennyCS

 

Did you use ER605 in Standalone mode?

Could you please share a screenshot of Time Settings in the System Tools Section?

If you refresh the page of ER605 web interface, can it fix?

 

Please note the time settings will be recovered to default one after rebooting if you set it as Manually.

So it doesn't suggest setting it as Manually if the ER605 needs to be rebooted frequently.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
6 Reply
Re:ER605 V2 2.1.2 Build 20230210 Rel.62992/ Regular Reboot -Solution
2023-05-05 08:59:10 - last edited 2023-05-26 06:40:16

Hello @BennyCS

 

Did you use ER605 in Standalone mode?

Could you please share a screenshot of Time Settings in the System Tools Section?

If you refresh the page of ER605 web interface, can it fix?

 

Please note the time settings will be recovered to default one after rebooting if you set it as Manually.

So it doesn't suggest setting it as Manually if the ER605 needs to be rebooted frequently.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
Re:ER605 V2 2.1.2 Build 20230210 Rel.62992/ Regular Reboot
2023-05-11 11:28:51

Hello @BennyCS

 

Hope you are doing well. I’m wondering whether your concern was resolved finally.

If your concern was resolved, welcome to update this topic thread and share your solution so that others may benefit from it.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#3
Options
Re:ER605 V2 2.1.2 Build 20230210 Rel.62992/ Regular Reboot
2023-05-31 17:27:39
Solved no problem wanted to share my finding. very happy to work with the TP link products. now installing OC300 with SX3008f 2x . VPN on the ER605 I'm not sure what the speed will be.
  0  
  0  
#4
Options
Re:ER605 V2 2.1.2 Build 20230210 Rel.62992/ Regular Reboot
2023-06-02 01:27:42

Hi @BennyCS,

 

Here is the Datasheet of ER605 V2, please refer to the official data.

 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#5
Options
Re:ER605 V2 2.1.2 Build 20230210 Rel.62992/ Regular Reboot
2023-07-09 16:12:05
Hi Hank, ER605 V2 2.2.0 Build 20230629 Rel.64012 Did an upgrade yesterday of my ER605 V2 everything was normaly executed. No problem for the update. But after validation of the VPN connections there seems to be a problem. I have no control over my VPN client and server anymore. I created Client to Site => Open VPN server Client to Site => Open VPN clients with NordVPN Fixed IP Both connections worked very good before the upgrade. But now something is wrong. Seems to me that the ER605 is not under control of the OC300 and VPN is not under control anymore. Did a reboot of the complete system and reinstalled the VPN clients but seems the same. Any suggestions? Kind regards, Benny.
  0  
  0  
#6
Options
Re:ER605 V2 2.1.2 Build 20230210 Rel.62992/ Regular Reboot
2023-07-10 01:15:41 - last edited 2023-07-10 01:20:27

Hello @BennyCS,

 

This VPN issue you reported will be updated in your new post here.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#7
Options